October Dyno Special @ F1DYNO !

F1DYNO · 10-01-2005, 09:30 AM

For the month of October we will be having special prices on dyno tuning and dyno pulls . We will be doing %50 off ALL dyno tuning ! Regular prices which are already some of the lowest dyno tuning prices were , $150 1st hour and $85 each additional hour of tuning . Also we are doing %50 off regular baseline dyno pulls with wide band . That consist of 3 back to back pulls on the dyno with cooling time between pulls and wide band reading on each pull ! Regular price was $100 . Also we had such great success with our UTEC TUNING SPECIAL that we are extending it into October ! $1050 for a UTEC and Map Switch , installed and tuned ! We still have the lowest prices on Invidia , Perrin , TurboXS , COBB , Omori and many other brands . Here is a quick recap of the specials we are running this month ..........

%50 off all dyno tuning = $75 1st hour & $42.50 each additional hour
%50 off base line dyno pulls = $50 for 3 back to back pulls with wide band
$1050 utec/switch/install/tuning special
lowest prices on Invidia/Perrin/TurboXS/COBB/Omori and many more

Also check out the vendor section of the forum for great deals that we are having on all our in stock items !

Thanx for looking guys !

Dave

* Registered users of the site do not see these ads.

Fitz · 10-01-2005, 09:41 AM

I would like to reserve a couple of hours on the 14th, 15th or 16th. Please let me know what/when works for you. Car is an '00 RS w/ a USDM wrx motor, Tec-2, CAI, DP, custom 3" exhaust.

Thanks,
Fitz
www.Flat4Racing.com

F1DYNO · 10-01-2005, 10:26 AM

Is your software already loaded on a laptop ? Give me a call on monday to discuss an appointment time . I have those dates available .

Thanx,
Dave

Fitz · 10-01-2005, 10:56 AM

Software's on the laptop. Car's been on Tec-II since late 2000.

I'll drop you a line on Monday.

Thanks,
Fitz
www.Flat4Racing.com

Zornorph · 10-01-2005, 08:35 PM

Bump for a great tuning shop. I got 322 torque with WI, stock turbo at F1. Torque peak at 3250 rpm. Feels really good!

kiefer · 10-01-2005, 10:17 PM

By any chance, d you guys have Cobb's protuner yet?

kahtep · 10-02-2005, 12:22 AM

Quote:

Originally Posted by kiefer

By any chance, d you guys have Cobb's protuner yet?

I would like to know this too, Thanks

gadget951 · 10-02-2005, 08:57 AM

I will give you guys a call during the week. Do you have race gas on site?

Scott

F1DYNO · 10-02-2005, 11:02 AM

getting race gas asap . let me know what octane you would like . just got an account with cobb . i can tune accessport in about 1 week or so . thanx guys .

Dave

F1DYNO · 10-03-2005, 08:57 AM

All PMs replied !

Dave

gadget951 · 10-17-2005, 07:45 AM

Just a bump before I get tuned today.

10-01-2005, 09:30 AM	#1
F1DYNO Vendor Vendor Sales Rating: (14) Member#: 91694 Join Date: Jul 2005 Location: Portland, Maine	October Dyno Special @ F1DYNO ! For the month of October we will be having special prices on dyno tuning and dyno pulls . We will be doing %50 off ALL dyno tuning ! Regular prices which are already some of the lowest dyno tuning prices were , $150 1st hour and $85 each additional hour of tuning . Also we are doing %50 off regular baseline dyno pulls with wide band . That consist of 3 back to back pulls on the dyno with cooling time between pulls and wide band reading on each pull ! Regular price was $100 . Also we had such great success with our UTEC TUNING SPECIAL that we are extending it into October ! $1050 for a UTEC and Map Switch , installed and tuned ! We still have the lowest prices on Invidia , Perrin , TurboXS , COBB , Omori and many other brands . Here is a quick recap of the specials we are running this month .......... %50 off all dyno tuning = $75 1st hour & $42.50 each additional hour %50 off base line dyno pulls = $50 for 3 back to back pulls with wide band $1050 utec/switch/install/tuning special lowest prices on Invidia/Perrin/TurboXS/COBB/Omori and many more Also check out the vendor section of the forum for great deals that we are having on all our in stock items ! Thanx for looking guys ! Dave * Registered users of the site do not see these ads. Last edited by F1DYNO; 10-01-2005 at 11:55 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-01-2005, 09:41 AM	#2
Fitz Scooby Guru Member Sales Rating: (18) Member#: 1426 Join Date: May 2000 Chapter/Region: NESIC Location: Goffstown, NH Vehicle: '07 335xi, '07 ZX6R SV650 Race Bike	I would like to reserve a couple of hours on the 14th, 15th or 16th. Please let me know what/when works for you. Car is an '00 RS w/ a USDM wrx motor, Tec-2, CAI, DP, custom 3" exhaust. Thanks, Fitz www.Flat4Racing.com

10-01-2005, 10:26 AM	#3
F1DYNO Vendor Vendor Sales Rating: (14) Member#: 91694 Join Date: Jul 2005 Location: Portland, Maine	Is your software already loaded on a laptop ? Give me a call on monday to discuss an appointment time . I have those dates available . Thanx, Dave

10-01-2005, 10:56 AM	#4
Fitz Scooby Guru Member Sales Rating: (18) Member#: 1426 Join Date: May 2000 Chapter/Region: NESIC Location: Goffstown, NH Vehicle: '07 335xi, '07 ZX6R SV650 Race Bike	Software's on the laptop. Car's been on Tec-II since late 2000. I'll drop you a line on Monday. Thanks, Fitz www.Flat4Racing.com

10-01-2005, 08:35 PM	#5
Zornorph Scooby Specialist Member Sales Rating: (23) Member#: 17332 Join Date: Apr 2002 Chapter/Region: NESIC Location: The neighbor's yard Vehicle: 2004 Black STI Not stock anymore	Bump for a great tuning shop. I got 322 torque with WI, stock turbo at F1. Torque peak at 3250 rpm. Feels really good!

10-01-2005, 10:17 PM	#6
kiefer Scooby Newbie Member Sales Rating: (11) Member#: 35285 Join Date: Apr 2003 Chapter/Region: Tri-State Location: Hoboken, NJ Vehicle: 2003 WRX color: speckled rock chip	By any chance, d you guys have Cobb's protuner yet?

10-02-2005, 08:57 AM	#8
gadget951 Scooby Newbie Member Sales Rating: (1) Member#: 18419 Join Date: May 2002 Chapter/Region: NESIC Location: Cape Cod Vehicle: 2002 WRX WR Blue	I will give you guys a call during the week. Do you have race gas on site? Scott

10-02-2005, 11:02 AM	#9
F1DYNO Vendor Vendor Sales Rating: (14) Member#: 91694 Join Date: Jul 2005 Location: Portland, Maine	getting race gas asap . let me know what octane you would like . just got an account with cobb . i can tune accessport in about 1 week or so . thanx guys . Dave

10-03-2005, 08:57 AM	#10
F1DYNO Vendor Vendor Sales Rating: (14) Member#: 91694 Join Date: Jul 2005 Location: Portland, Maine	All PMs replied ! Dave

10-17-2005, 07:45 AM	#11
gadget951 Scooby Newbie Member Sales Rating: (1) Member#: 18419 Join Date: May 2002 Chapter/Region: NESIC Location: Cape Cod Vehicle: 2002 WRX WR Blue	Just a bump before I get tuned today.