09-09-2001 06:06 PM by
slide
I want to buy rear camber plates. Or even just solid mounts. Rears only for a 95 wagon. Anyone have any for sale?
925-957-0217. .
Thanks
Try iSR, SPD, or COBB. Pretty much all of the Impreza parts cross over from what I can see/done. Just double check with them they should know.
-Matt
09-13-2001 01:04 PM by
BG5
But I thought the Legacy had different rear mounts than the Impreza (single piece instead of two piece and somewhat different hole configuration). Subie Gal had this problem a while back and IIRC DMS-USA had the solution.
Don't know any cheap options (bar ordering from Japan)...
Otherwise the ghetto solution is to get some new or used ones and fill all the spaces in the rubber with windshield or rubber-repair polyurethane of a hard durometer. 3M makes a cartridge of the stuff that some people like to use for around $10.
If you really want to adjust camber, look for camber bolts from specprod.com (they make the Whiteline bolts)
09-13-2001 01:22 PM by
gtguy
Thing number one: PBMs are going to be noisy as HECK in a wagon, take it from a guy who had 'em. Having said that, Tein and Cusco both do stand alone PBMs. Hook up with Imprezer, or Dale at Teague's Auto. Either one of those guys should have answers for you.
Legacies do indeed have different rear top mounts, but the WRX uses the same mount. So with the development of the aftermarket for that car, you will have more options than you would have had six months ago.
Good luck,
Kevin
09-13-2001 07:24 PM by
slide
They have been in production for years. Its different than the impreza, bolt spacing. I just wanted to see if anyone had a set they wanted to sell.