FS: MY00-04 BE/BH Back to stock sale (may fit others too)

iamrazor · 02-27-2006, 10:11 AM

please close. old thread. I no longer have the vehicle

* Registered users of the site do not see these ads.

PHATsuby · 02-27-2006, 10:14 AM

dibs on rear sway bar, tell me where to send money

Ben

PHATsuby · 02-27-2006, 10:18 AM

oh yea, how is condition, is it rusted?

thanks

Ben

iamrazor · 02-27-2006, 10:20 AM

its got rust (been through a few New England winters) you got dibs unless you dont want it. might be this weekend before I get it off the car though. When its removed, I'll give you my address.

sure you don't want the endlinks too?

PHATsuby · 02-27-2006, 10:27 AM

alright let me know when its off, i'll take it. I'll have to ponder the endlinks, I have heard they are a good mod, hmm so its everything needed besides what like 4 bolts?

Ben

iamrazor · 02-27-2006, 11:23 AM

yes, the RSB comes with the correct bushings. you could use the stock endlinks if you can get them off. When i did mine, I broke one of my endlinks. If you wanted both and the bar, I'll make a pkg deal.

bhall · 02-27-2006, 12:17 PM

I have a shifter knob and stock shifter if you need them. Since Ps is so fast on the RSB I dont know that I need much else. The exhaust sounds good but I think shipping will be a pain. Maybe we can swap the knob for the filter?

IDMO · 02-27-2006, 12:39 PM

Would I be correct in assuming that the header is in the same condition as the RSB?

iamrazor · 02-27-2006, 01:39 PM

bhall:
If you have a good shop, I could cut it in half or something???
I need a knob, but could return it after i purchse the vehicle (since it has one). I just dont want to part with my kartboy one...

IDMO:
The header actually isnt in that bad a shape. The person cleaned it up quite substantially before I got it.

bhall · 02-27-2006, 02:10 PM

Quote:

Originally Posted by iamrazor

bhall:
If you have a good shop, I could cut it in half or something???
I need a knob, but could return it after i purchse the vehicle (since it has one). I just dont want to part with my kartboy one...

I dont know if after shipping and paying to have it rewelded if it may not be easier to just get a new one made here.

As far as the shift knob goes let me know what you need. I have the stock bushing, shifter and knob.

Also can you post a pic of the COBB with the hole so I can see what kinda job getting it welded will be.

Thanks

ADirtyLegacy · 02-27-2006, 05:03 PM

ugh!! apparently NOBODY realizes i'm trying to NOT spend money on my car b/c i'm trying to sell it ASAP!!

everyday it seems someone makes this task more difficult!!!

good luck on the sale of stuff.

Kenda

ps...any pics of the exhaust fitment with the bumper?

iamrazor · 02-27-2006, 08:49 PM

MitchGT · 02-27-2006, 10:37 PM

Wow, another BE down. Now who's gonna buy my springs this summer?!?! Good luck with the sale razor. Keep us updated on what you're buying.

Aken · 02-27-2006, 11:38 PM

I'll buy your springs in summer

I'd love to snag that intake, but I have no money's right now

Trade for stock?

iamrazor · 02-28-2006, 06:45 PM

sorry, I still have my stock intake stuff. Its going back on this weekend.

Aken · 02-28-2006, 07:26 PM

Mine's better.

Haha.

iamrazor · 03-05-2006, 11:24 AM

bump for updates.

CAI is off the car.
RSB comes off this week.
Love to get rid of this cat-back...

Iceman12321 · 03-06-2006, 09:27 AM

how big is the sensor hole in the CAI?

iamrazor · 03-06-2006, 12:18 PM

I don't know off hand. you probably have the same IAT in your airbox.

Interested?

ADirtyLegacy · 03-06-2006, 04:44 PM

this is so tempting...must..stop..clicking..this...thread..AH HHHH!!!

Kenda

iamrazor · 03-06-2006, 06:03 PM

do it doo iit ddooo eeettt!!!!!

Iceman12321 · 03-06-2006, 09:54 PM

Your car is a 2000, which means you do NOT have the IAT sensor, correct? If so, this means that I wouldnt have it either. I was just curious if I would at all effect the overall performance of the intake.

iamrazor · 03-06-2006, 10:04 PM

my car is a 2000, but it DOES have it.
I'd just check your airbox. you may or may not have it. I suppose you could just cover it if you really wanted.

After removing it, I notice a real difference

sorry to see it go.

iamrazor · 03-08-2006, 08:00 AM

Quote:

Originally Posted by Iceman12321

how big is the sensor hole in the CAI?

looks like its ~3/4" dia

oh, and bump!

Payback45 · 09-28-2007, 05:49 PM

I know this post is really old but did you sell the cobb CAI?

02-27-2006, 10:11 AM	#1
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	FS: MY00-04 BE/BH Back to stock sale (may fit others too) please close. old thread. I no longer have the vehicle * Registered users of the site do not see these ads. Last edited by iamrazor; 11-01-2007 at 08:17 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
back to stock sale coilovers and other parts cheap	mrguppy	MAIC Private Classifieds	14	10-13-2008 02:46 PM
FS: 04 Wagon Back to Stock Sale!	wrbwagonguy	SCIC Private Classifieds	49	05-05-2008 06:40 PM
FS: 05 STI never going back to stock sale	AnorexicSTI	VIC Private Classifieds	149	10-19-2007 02:16 AM
Back to stock sale, VF39, FMIC, AP V2 many others...	Matt_H	MAIC Private Classifieds	63	09-09-2007 11:38 PM
SoCal: 04 WRX Back to Stock Sale	nhua78	Private 'For Sale' Classifieds	2	10-24-2005 12:44 PM

02-27-2006, 10:14 AM	#2
PHATsuby Scooby Guru Member Sales Rating: (12) Member#: 13617 Join Date: Dec 2001 Chapter/Region: MWSOC Location: MN Vehicle: 2001 Legacy GT back to stock is a project too	dibs on rear sway bar, tell me where to send money Ben

02-27-2006, 10:18 AM	#3
PHATsuby Scooby Guru Member Sales Rating: (12) Member#: 13617 Join Date: Dec 2001 Chapter/Region: MWSOC Location: MN Vehicle: 2001 Legacy GT back to stock is a project too	oh yea, how is condition, is it rusted? thanks Ben

02-27-2006, 10:20 AM	#4
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	its got rust (been through a few New England winters) you got dibs unless you dont want it. might be this weekend before I get it off the car though. When its removed, I'll give you my address. sure you don't want the endlinks too?

02-27-2006, 10:27 AM	#5
PHATsuby Scooby Guru Member Sales Rating: (12) Member#: 13617 Join Date: Dec 2001 Chapter/Region: MWSOC Location: MN Vehicle: 2001 Legacy GT back to stock is a project too	alright let me know when its off, i'll take it. I'll have to ponder the endlinks, I have heard they are a good mod, hmm so its everything needed besides what like 4 bolts? Ben

02-27-2006, 11:23 AM	#6
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	yes, the RSB comes with the correct bushings. you could use the stock endlinks if you can get them off. When i did mine, I broke one of my endlinks. If you wanted both and the bar, I'll make a pkg deal.

02-27-2006, 12:17 PM	#7
bhall Scooby Newbie Member Sales Rating: (0) Member#: 56015 Join Date: Feb 2004 Chapter/Region: RMIC Location: Denver, CO Vehicle: No you're a towel!	I have a shifter knob and stock shifter if you need them. Since Ps is so fast on the RSB I dont know that I need much else. The exhaust sounds good but I think shipping will be a pain. Maybe we can swap the knob for the filter?

02-27-2006, 12:39 PM	#8
IDMO Scooby Newbie Member Sales Rating: (3) Member#: 91819 Join Date: Jul 2005 Chapter/Region: South East Location: Tampa Vehicle: 2004 FXT	Would I be correct in assuming that the header is in the same condition as the RSB?

02-27-2006, 01:39 PM	#9
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	bhall: If you have a good shop, I could cut it in half or something??? I need a knob, but could return it after i purchse the vehicle (since it has one). I just dont want to part with my kartboy one... IDMO: The header actually isnt in that bad a shape. The person cleaned it up quite substantially before I got it.

02-27-2006, 05:03 PM	#11
ADirtyLegacy Scooby Specialist Member Sales Rating: (0) Member#: 77394 Join Date: Dec 2004 Chapter/Region: South East Location: Huntersville Vehicle: 05 LGT OBP	ugh!! apparently NOBODY realizes i'm trying to NOT spend money on my car b/c i'm trying to sell it ASAP!! everyday it seems someone makes this task more difficult!!! good luck on the sale of stuff. Kenda ps...any pics of the exhaust fitment with the bumper?

02-27-2006, 08:49 PM	#12
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata

02-27-2006, 10:37 PM	#13
MitchGT Scooby Specialist Member Sales Rating: (0) Member#: 73684 Join Date: Nov 2004 Chapter/Region: NWIC Location: Kirkland, WA Vehicle: 2012 4Runner	Wow, another BE down. Now who's gonna buy my springs this summer?!?! Good luck with the sale razor. Keep us updated on what you're buying.

02-27-2006, 11:38 PM	#14
Aken Scooby Specialist Member Sales Rating: (1) Member#: 41308 Join Date: Aug 2003 Chapter/Region: MWSOC Location: West Allis, WI Vehicle: 2006 ABP Legacy GT '02 F4i / '07 ZX-10R	I'll buy your springs in summer I'd love to snag that intake, but I have no money's right now Trade for stock?

02-28-2006, 06:45 PM	#15
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	sorry, I still have my stock intake stuff. Its going back on this weekend.

02-28-2006, 07:26 PM	#16
Aken Scooby Specialist Member Sales Rating: (1) Member#: 41308 Join Date: Aug 2003 Chapter/Region: MWSOC Location: West Allis, WI Vehicle: 2006 ABP Legacy GT '02 F4i / '07 ZX-10R	Mine's better. Haha.

03-05-2006, 11:24 AM	#17
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	bump for updates. CAI is off the car. RSB comes off this week. Love to get rid of this cat-back...

03-06-2006, 09:27 AM	#18
Iceman12321 Scooby Specialist Member Sales Rating: (1) Member#: 71034 Join Date: Sep 2004 Location: Ohio Vehicle: 2001 Outback Ltd. Sedan - White	how big is the sensor hole in the CAI?

03-06-2006, 12:18 PM	#19
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	I don't know off hand. you probably have the same IAT in your airbox. Interested?

03-06-2006, 04:44 PM	#20
ADirtyLegacy Scooby Specialist Member Sales Rating: (0) Member#: 77394 Join Date: Dec 2004 Chapter/Region: South East Location: Huntersville Vehicle: 05 LGT OBP	this is so tempting...must..stop..clicking..this...thread..AH HHHH!!! Kenda

03-06-2006, 06:03 PM	#21
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	do it doo iit ddooo eeettt!!!!!

03-06-2006, 09:54 PM	#22
Iceman12321 Scooby Specialist Member Sales Rating: (1) Member#: 71034 Join Date: Sep 2004 Location: Ohio Vehicle: 2001 Outback Ltd. Sedan - White	Your car is a 2000, which means you do NOT have the IAT sensor, correct? If so, this means that I wouldnt have it either. I was just curious if I would at all effect the overall performance of the intake.

03-06-2006, 10:04 PM	#23
iamrazor Scooby Guru Member Sales Rating: (7) Member#: 52324 Join Date: Jan 2004 Chapter/Region: NESIC Location: Pelham, NH Vehicle: 2011 SWP WRX LTD 1990 T30 miata	my car is a 2000, but it DOES have it. I'd just check your airbox. you may or may not have it. I suppose you could just cover it if you really wanted. After removing it, I notice a real difference sorry to see it go.

09-28-2007, 05:49 PM	#25
Payback45 Scooby Newbie Member Sales Rating: (1) Member#: 129370 Join Date: Oct 2006 Chapter/Region: MAIC Location: Woodbridge, VA Vehicle: 2009 Legacy GT LTD	I know this post is really old but did you sell the cobb CAI?