View Single Post
Old 07-12-2007, 01:14 AM   #3
RaceComp Engineering
Member#: 54202
Join Date: Feb 2004
Chapter/Region: MAIC
Location: Elkridge, Maryland


2004-2007 Impreza WRX, WRX Wagon, 2.5RS, 2.5 RS Wagon, Outback Sport

Strut tops and Camber Plates
Camber Bolts
Strut Bars
Swaybars and Swaybar mounts/bushings
Wagon Differences


The following have a specific fitment for 04-07 WRX and RS, and all spring and strut top fitment with these is the same as it is for the stock struts.

1. Koni Inserts (not a complete strut, see here for install
2. Ohlins Fixed Perch Struts
3. STi Version 8 OEM (2004 USDM STi)
4. STi Version 8 Arai Pink Struts
5. KYB GR2 (now also available in 04+ fitment)

The following OEM and aftermarket struts for 02-03 Impreza can work in 2 ways.

2. KYB GR2
3. Koni Inserts (there is an 04+ specific version too, so you can just get that)
4. Tokico HP
5. Tokico D-SPEC
6. STi/SPT Version 7

Either by using 02-03 springs and 02-03 rear strut top mounts.


By using 04+ style springs, 04+ style rear strut top mounts, and the Scooby921 strut spacer. Details on why the spacer is needed available here:

Scooby921 Strut Spacer available here:

05+ STi struts will not fit.

Wagons are different, see notes below.


Springs for 04-07 RS or WRX will fit.

Aftermarket springs designed for Impreza STi will be too stiff for stock struts. OEM STi springs work well though.

To use springs designed for 02-03 Impreza, you must use 02-03 Impreza struts and rear strut top mounts.

See strut section above for spring fitment when using 02-03 struts.

Strut tops and Camber Plates

All 02+ RS, WRX, and STi front strut top mounts and front camber plates will fit the front.

02-03 rear strut tops fit the rear only with 02-03 springs.

04+ style rear strut top mounts require 04+ style springs.

2002-2007 2.5RS, TS, and 2.5i strut tops are softer then both WRX and STi strut tops (which are the same stiffness). confirmed?

WRX and STi strut tops are the same stiffness. STi strut tops are NOT Group N strut top mounts, which are even stiffer.

Camber bolts

All 02-07 Impreza RS, WRX and STi camber bolts are interchangeable and 14mm.

Strut Bars

Front and rear strut bars from any 02-06 RS, WRX, and STi will fit.

Front strut bars for 02-05 Impreza fit the 06-07 WRX but with some difficulty regarding the AC lines. There are a few 06-07 specific front strut bars.


Any complete coilover for 02-07 RS, WRX and 04 STi will fit.

05+ STi coilovers will not fit.

Swaybars and Swaybar mounts/bushings

All rear swaybars for any 02-07 RS and WRX will fit. STi rear swaybars will mount on the outside of the endlinks and their effectiveness is reduced.

04+ RS, WRX, and STi rear swaybar bushings will not fit 02-03 swaybar mounts.

04+ RS, WRX, and STi rear swaybar mounts will fit are an upgrade but require 04+ swaybar bushings.

Front swaybars for 02-07 WRX will fit, except on RS models. Wagons are different, see notes below.

02-07 Impreza RS require a specific sway bar to clear the non-turbo headers. WRX and STi front swaybars will not fit an RS.


Front endlinks from any sedan 02-07 RS, WRX, or STi will fit the sedan. Wagons are different, see notes below.

Rear endlinks from any 02-07 RS and WRX will fit sedan and wagon. STi rear endlinks will not fit.


All rear lateral links and trailing arms for 02-07 RS and WRX, and 04 STi will fit, except from a wagon. Rear Lateral Links from a STi will require rear STi endlinks and STi rear swaybar. Also see notes on wagon differences.

All front control arms for 02-07 RS, WRX and STi will fit. Control arms are aluminum for 06 WRX, but fitment remains the same. Wagons are different, see notes below.

All Anti-lift kits for 02-07 WRX and STi will fit.

Fender Braces do not fit non-turbo models.

2006 Impreza and 2005-2007 Impreza STi use the same steering rack bushings. All other applications will not fit.

WRX Wagon, OBS and 2.5 RS Wagon Differences


Struts are specific to the Wagon. While sedan OEM and aftermarket struts and coilovers will fit, you will lose negative camber.

This can be corrected with camber bolts and/or camber plates.

The only upgraded struts that retain stock camber are KYB GR2s and Koni inserts in gutted Wagon Struts.


Using sedan springs on a wagon often results in a saggy rear end. Prodrive WRX springs are a notable exception. Wagon specific versions are available from a few manufacturers.


Wagon front swaybars are shorter then sedan and require a specific wagon fitment. Sedan front bars have been used successfully in certain cases with certain endlinks.


Wagons require wagon specific front endlinks, unless you swap to sedan front control arms.


Front control arms are different. Upgrading to sedan control arms gives you a wider track. It allows you to run sedan a front swaybar, of which there are more choices. It also allows you to run sedan struts without losing negative camber, or you can keep your wagon struts and gain negative camber. You will be required to use sedan front swaybars and sedan front endlinks. It is recommended to use sedan front axles as well, but not required.

Rear lateral links are different. Switching to sedan lateral links requires switching to sedan rear axles.
* Registered users of the site do not see these ads.

Last edited by RaceComp Engineering; 06-10-2009 at 11:15 PM.
RaceComp Engineering is offline   Reply With Quote