View Single Post
Old 05-08-2008, 05:17 PM   #63
Will mod for Guinness
Member#: 77921
Join Date: Dec 2004
Chapter/Region: Tri-State
Location: Orange County, New York
'02 Foz
'07 'beca, '08 OBXT


Originally Posted by ProdriveDreams View Post
I reccomend getting a 04-05 cluster i just did an 05 cluster install in my '02 you need to cut C9 (STi diagram C9) and cut b28 i think... also there is one wire which needs to be grounded to turn off the rear diff temp light. and you need to hook up a relay or open up the cluster and cut out the reverse circuit and solder in a jumper wire, in order to get the ABS to work correctly as the 02-03 have the opposite polarity for our ABS light. I'll get the diagram i wrote it all up on and give you specifics. Not terribly difficult but not the easiest thing either. about a 3 on a 10 point scale.

oh right and trim one of the plugs so it will plug in correctly.
That diagram would be great.

I swapped a Forester STi cluster (same as the V7) into my '04 Forester XT yesterday and have the e-brake light always illuminated and the ABS light on all the time. I haven't tried the cruise control yet.
* Registered users of the site do not see these ads.
singincanary is offline   Reply With Quote