View Single Post
Old 05-20-2011, 01:51 PM   #2
bill hincher
Scooby Newbie
Member#: 280288
Join Date: Apr 2011
Location: Toledo,Ohio USA

the two series of transmissions that are used are either the Toyota 'W' series trans ( from w 55 to 59 2wheel drive or 4 wheel drive)
OR the 'R' series Toyota transmission ( either the R 150 or the R 151 from the V-6 Toyota truck in either 4wheel drive OR 2wheel drive)
depending on how they are ordered is how they are machined
The R 154 was avoided because the trans is getting harder to find and more expensive, so these two common transmissions were chosen, the R 154 input shaft is 3/4 inch longer and can be used in the R design bellhousing if needed
these are designed to use all the stock Subaru components over with nothing more then adding a stock toyota clutch disc

* Registered users of the site do not see these ads.

Last edited by bill hincher; 05-20-2011 at 02:01 PM.
bill hincher is offline   Reply With Quote