View Single Post
Old 03-10-2003, 11:55 AM   #4
NASIOC Supporter
Member#: 232
Join Date: Sep 1999
Chapter/Region: MWSOC
Location: Ft Wayne, IN
02 Forster-S


Make your own, its cheaper. Check out for a couple of options (I did the custom MSD write up). Anything is better than stock, so really it doesn't matter which brand you go with. Magnecores are a high resistance wire (I think the NGKs are also) which means they should be a quick swap. MSDs, Taylors, etc can be bought in 2 versions... high and low resistance. Low resistance wires will get more spark to the plug (in the same time interval) but the gap must be increased (rather dramatically) to keep them firing correctly (your moving the current at low resistance but the overall resistance of the system must remain rel constant so you increase the effective res by increasing the plug gap... make sense?). Stay away from Nology Hotwires, Direct Hits, etc as they are somewhat gimicky and way expensive for what you get... Any spark plug or wire that claims hp increases is b/s.
* Registered users of the site do not see these ads.
BOY is offline   Reply With Quote