View Single Post
Old 11-29-2011, 02:02 AM   #1
Scooby Newbie
Member#: 221915
Join Date: Aug 2009
Chapter/Region: BAIC
Location: S.F. Bay Area, CA
1995 SR20/Impreza L
Metallic Green

Default *PowerPlenty* RWD SR20DET/95' Impreza L

*PowerPlenty* RWD SR20DET/95' Impreza L Build
*Parts will be added as they are acquired*

Subaru Impreza L


Vallejo, CA

Robert Ljuba
Instagram/Twitter: robertljuba

Project Build
RWD Impreza GC8/SR20DET (Drift Project)

SR20DET Redtop
Neukin Turbo Manifold
Tial 44MVR Wastegate
GReddy Type S BOV
SARD 550cc Injectors
Apexi Fuel Pressure Regulator
Apexi Headgasket
Supra TT Fuel Pump
HPI Oil Block Adapter
Earl's Remote Oil Filter

Apexi Power FC D-Jetro
HKS EVC-S Boost Controller

Custom 3inch exhaust to 3 1/2inch APS Muffler

Mishimoto G-Line Intercooler
Mishimoto Radiator Hoses
Howe Racing Radiator (16x27.5)
16” Spal Electric Fan

2006 STI Brembo Calipers/Hubs
Fortune-Auto 500 Series Coilovers
05 STI R180 (Modded by Weir Performance)
Driveshaftshop 800hp Axles

04 WRX Dashboard
04 WRX Gauge Cluster
Custom Switch Panel
AutoMeter UltraLite Gauges
Bride Zeta II NEOS Seat
6pt Formula D Spec Cage
Simpson 5pt Harness

01 Impreza 2.5RS Front Bumper
B-Magic 40mm Rear Quarter Panels
B-Magic 40mm Front Fenders

5Zigen GN+ 17x9.5 +22 F/R

Cricks Racing Fabrication
Borco Performance
Weir Performance
Neukin Motorsports

Import Tuner Magazine (May 2011 Issue #146)
5Zigen Blog entry 2/16/2011 (Impreza for Drifting)

Well well well where do I start with this? So basically I've had this dream/idea of having a SR20 powered subaru. Since my 1st love was a gc8 and my 2nd was my SR/S13 I only thought it would be necessary. I always wanted to do it but was low on funds. I got together with some newly acquainted people that are pretty damn good at what they do when it comes to fabrication and wiring. The guys down at Duncan Motors here in Vallejo, CA have been more than helpful to me. The guys down there most definitely know what they're doing especially when it comes to fab work and electrical. We are going through the process of making EVERYTHING perfect for this setup from motor placement to the actual geometry of the car. This car has a lot of man hours and patience put into it, and when you see the finished project you will understand why. This car already had a SR in it and was running but was strictly a mock up, but the engine blew so now I'm basically starting over. I yanked the old motor and got another one. Basically what we have here is a 95 Impreza L that has been converted from AWD to RWD. The car was originally supposed to be a track car, but I'm working on putting interior back together and using it on a daily basis. I know there is less than a handful of people already trying this swap, but i plan to be the first on actually having it running and driving with ZERO problems. For the mock fit, the crossmember was lowered 1 1/2inch and notched. We used solid polyurethane S13 engine mounts with a S13 Nismo transmission mount. The welded R160 differential and 1-piece driveshaft is already made and ready to go as well. Please feel free to ask any questions. These are pictures of where the car stood almost 2 years ago. (02 WRX dash, FMIC and some other things haha). The nicer/cleaner looking Impreza is just a parts car i bought. More pictures will be posted after every step is complete!

* Registered users of the site do not see these ads.

Last edited by RiSky; 11-15-2012 at 09:43 PM.
RiSky is offline   Reply With Quote