View Single Post
Old 02-12-2012, 01:23 PM   #14
Scooby Newbie
Member#: 200596
Join Date: Jan 2009
98 Forester 3.0R


Forester dash and everything else removed, I will need to put in the legacy bulkhead harness

here is the engine bolted in with the clutch connected. I removed the radiator and a/c condensor to ease the install plus i am modifying them to fit with the h6 engine.

In order to fit the stock radiator/fans I did a couple things, notched the front crossover

also modified the fan brackets by grinding off material from the outer edges. and modified the radiator mount to bring the radiator forward by about .5"

Its close but everything fits back in with about .5" to spare, oh and the only other thing that allowed me to get the fans to fit was flipping them upside down.

* Registered users of the site do not see these ads.
lodown1 is offline   Reply With Quote