View Single Post
Old 03-13-2012, 10:45 PM   #5
Scooby Newbie
Member#: 309206
Join Date: Feb 2012
Location: Toronto

More to come....
Especially need to have some pics of the 90 degree boot, since my explanation needs work!

I will take some more SPL readings through the rest of the install so we can hopefully see some improvements in road noise.

Also, I've been looking into mass loaded vinyl to use as a sound barrier on the doors/foot-well.. All in time I guess.

For those who have unplugged the door card (thus the window switches), you need to initialize the auto-up/down drivers window:

Initialize the power window using the
following procedure to reactivate these

1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
3. Open the driver’s side window halfway
by pushing down the power window
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed completely.
* Registered users of the site do not see these ads.
56k is offline   Reply With Quote