View Single Post
Old 04-17-2012, 02:57 PM   #1
Moore Performance
Former Vendor
Vendor Sales Rating: (3)
Member#: 231489
Join Date: Dec 2009
Chapter/Region: MAIC
Location: Pittsburgh, Pa

Moore Performance & Race Parts is proud to offer the 5 MT Subaru owner an option to finally strengthen their transmission with a well engineered, attractive looking package that is designed to increase rigidity while providing many years of service in all conditions!

The Moore Performance & Race Parts "Blast Plates" are heavy duty steel, tig welded and are finished with a layer of brilliant black powdercoat. The package also includes high strength (tubular) aluminum spacers and grade 10.9 hardware.

We are currently finishing up the production versions of our Blast Plates and were ready to start taking orders! On one of our higher HP test cars we coupled a set of prototype blast plates to our (soon to be released) 5 mt transmission and we were able to safely harness almost 400wtq and over 500whp on a local Mustang dyno, followed by many miles of hard driving!

The Blast Plates are a perfect upgrade for any 5 speed manual transmission from stock horsepower levels to over 500+ horsepower! Shown below is a 3d image of the production item and actual product photos are soon to follow. Please feel free to shoot us any questions that you might have have and custom powdercoating is available for an additional cost.

So we have been getting a lot of questions on this! A lot of interest and a lot of questions! For those of you that aren't familiar with some of the transmission brace plates people have made in the past here is a pic of everything that will be in the kit. It will come with all of the hardware required including aluminum spacers to properly mount the plates to the transmission. The plates are bolted through existing bolt locations that hold the two halves of the transmission together. By bolting these plates onto the outside around the gear set it increases the stiffness of the casing to improve gear mesh tolerances under shock loading and high torque situations. These plates are made of very heavy gauge steel (plates are 3/16" thick!) and steel is ~2.5 times stiffer than aluminum. These were designed to make them as stiff as possible while still keeping our cost down to be able to offer these great prices!

Pre Production Prototype ready to be welded:

Here is a dyno vid showing some of our earlier trial runs using one of our test vehicles wearing the Blast Plates and our 5 MT transmission. On this pull the car made 507whp and just under 390wtq.

Quantity and Pricing

***Please PM to have your name added to the list!***

GB length - looking at 2 weeks for this group buy before we remove it and offer another product

Payment - $100.00 payment due when your name is added to the list, balance is due at the end of the group buy

Retail pricing - $399.00

Pricing Structure -
1-5 = $315.00
5-10 = $290.00
10+ = $265.00

1 Bettner12
2 Procomp Race Systems
3 Amp0412
4 slowgenius
5 Rabid_Machina

7 Craig4g63
8 GC 2 NV
9 sorrowfulkiller
10 Charles McMillan

11 jst0915
12 loafman
13 twiz
14 Joebobanaught
15 samurai jack
16 lil jon
17 mlitz
18 VSGTS14
19 abrumlev

* Registered users of the site do not see these ads.
The Moore Performance Team
(412) 777-9661

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by Moore Performance; 05-02-2012 at 10:32 AM.
Moore Performance is offline