View Single Post
Old 04-21-2012, 09:50 PM   #21
Scooby Guru
Member#: 3102
Join Date: Nov 2000
Chapter/Region: NESIC
Location: Northern, CT
2012 Sport Limited
Ice Silver


Originally Posted by bobdole888

I would have hooked up the wireless cam to the back up light, so I thought that would be fairly easy since all the wiring would stay in the hatch.

I don't know how hard it is to route a wire from the hatch to the HU.

It seems that Brys found some passage to route the AV wire. Does this need some special tool to pull a wire through?
Route the 1 wire under the trim on the drivers side, follow the wire loom or washer fluid line (5 door).

Buy SVXdc's 8 pin harness, connect the spade connector to one of the screws on the body of the radio, then plug in the AV cable.

The "special tool" i use is a bent out hanger or a long wooden dowel with the wire taped to it to pull the wires through the rubber boots and to route the cable from the reverse lights to the hatch door.
* Registered users of the site do not see these ads.
BrysImpreza is offline   Reply With Quote