Thread: injector issues
View Single Post
Old 05-08-2012, 01:52 AM   #4
Scooby Newbie
Member#: 276321
Join Date: Mar 2011

ya ok, was just typing as I go.

No they don't piss out of the top of the rail. The only place fuel comes out of is the tip of the injector like it's supposed to. Where the injector pokes out of the fuel rail into the intake is dry too. Where the cap is screwed down to hold the injector is also dry. Both o-rings are sealing properly.

Yes I used petroleum jelly when installing them.

The injector is sealing and spraying good when mounted to a stock fuel line out of the intake. Two pics up shows how I hooked it up. The problem is as soon as I mount the injector/fuel rail into the intake, turn it over and it floods the cylinder, soaks the spark plug and creates a hydrolock and the engine cannot be turned over by the starter.

definitely stumped....not too frustrated yet....this is weird
* Registered users of the site do not see these ads.
REED FLEMMMMING is offline   Reply With Quote