Thread: My First Suby
View Single Post
Old 06-10-2012, 07:28 PM   #126
Scooby Newbie
Member#: 283189
Join Date: May 2011

As mentioned,

I decided to go ahead to paint my brembos. I haven't received the Brembo stickers yet, but I went about painting them.

Here is what you need:

-Jack Stand
-News Paper/Scrap paper
-Masking tape
-Paint (VHT High Temp Paint)
-Sand Paper

Here is the product:

Pre-Paint (Notice all the bumps and scratches)

Prepare area or remove caliper

Use Sand paper to sand down Brembo try to sand down all the notches, Some people Suggested you only sand down lightly, but that depends what condition your brembos are in, I should of sanded mine more.

Paint with 3 coats of Primer

Wait 10 minutes between each coat

Start painting as evenly as possible with your chosen color paint. Don't let it streak

Apply 2 heavy coats and 1 light. Leave 15 minutes between to make sure everything is dry.

Apply sticker

Then Apply 3-4 coats of Clear. Be generous but don't let it streak.

* Registered users of the site do not see these ads.
od_man99 is offline   Reply With Quote