View Single Post
Old 06-24-2012, 05:05 AM   #8
Scooby Specialist
Member#: 317856
Join Date: Apr 2012
Chapter/Region: Tri-State
Location: CNY

Originally Posted by O.C.D. View Post
Remove the driver's side wheel and have some fun. Getting the fender liner out was not the easiest but dooable. Just be careful with the trim work:

When removed, look up into the fender and you will see this:

On the top of this grommet there is an area that you can cut into and feed the cabling through.

naked dash:
how the heck do you get the fender liner out? i saw 2 plastic pop rivets, popped those. then i saw phillips head plastic screws but they are tucked behind the side skirt? any tips or tricks? installing my defi boost gauge tonight.

fun fact. i tried fishing the wire through one of the firewall access holes, for 3 hours. Im not a novice when it comes to wiring. I have fished many wires over the years. Home, commercial, auto, etc... i wasnt even angry, I was just perplexed as to why i couldnt find the damn coat hanger under the dash. 3 freakin hours.

hence why im asking about going through the fender, i gave up.
* Registered users of the site do not see these ads.
waltah is offline   Reply With Quote