View Single Post
Old 10-07-2012, 03:49 PM   #35
Scooby Newbie
Member#: 249852
Join Date: Jun 2010
Chapter/Region: NESIC
Location: canton ma
1998 2.5rs
blue ridge pearl


so i wired that pink wire in and tried r/s and starter doesnt engage now. i didnt change anything at that time except for that wire b/c it was on a different one. I then checked all wired for the 10pin. bigger gauge. this is how it is now.

h3/1 pink=gr not cut, spliced (car side)
2 red/white= nothing
3 orange=yellow
4 violet= white/black not cut, spliced (car side)
5 green= opp side of black white (key side) not cut spliced
6 red= constant 12v white(car side)
7 pink/white= nothing
8 pink/black= nothing
9 red/black= constant 12v white (car side)
alarm still works properly and wont let me start the car if its going off. whats missing?
* Registered users of the site do not see these ads.
perez8608 is offline   Reply With Quote