View Single Post
Old 11-18-2012, 09:56 AM   #15
Aaron'z 2.5RS
Scooby Guru
Member#: 1026
Join Date: Mar 2000
Chapter/Region: MWSOC
Location: Hickigan
'00 RS/WRX Stg5
'98 RS Stock


Pop the lower ball joints in the front to get the axles (losen nut and whack the crap out of the LCA over the BJ, while putting downward pressure with a pry) out OR once the trans is unbolted, you can move it around enough to get one side at a time on the inners, it's just more of a pain to do that to get it BACK in ...

AFA the shifter, pull all the screws from the top boot, pull the rear shifter mount and take it all out with the car...
* Registered users of the site do not see these ads.
Aaron'z 2.5RS is offline   Reply With Quote