View Single Post
Old 01-29-2013, 10:53 AM   #241
Scooby Newbie
Member#: 309754
Join Date: Feb 2012
Chapter/Region: Tri-State
Location: Brewster, NY
2012 Impreza Sport L
Ice Silver Metallic


You going have to cut out the empty space where the switch is going to be mounted on the dash or order the bezel with pre-cut slots for the Foglight switch & the traction control switch. I will post more pictures as soon as I come out the dealer. It's item #5 on the diagram.

This entire piece must come off first then unscrew the Philip screw to loosen the dash mounting where the empty slot is located if you try to pry it off you will brake it.

This is the screw that must remove or you gonna break that clip. which you really do not need, also I would remove the entire panel first then the wires are long enough for you to unplug the connectors.
* Registered users of the site do not see these ads.

Last edited by ZURCALED12; 02-13-2013 at 09:59 PM.
ZURCALED12 is offline   Reply With Quote