Originally Posted by mopar3.0
Just finished and installed it today. and yes i cut the old tubes that were in the original bushings,
i also had to use thin washers on the bolts inside the u brackets so the bracket would not bind up the outside of the bearing.
The shifter feels great,like its its park of the gear box like a mustang or 240
also added about 1/2-3/4 of a inch to the bottom on shifter , Its now about 3.5 inches between each gear!
d0000000000000000000d....i hate to ask but......
take it all apart and take pics and post them......otherwise, nobody will want to attempt this....well...i will, but....