View Single Post
Old 04-01-2005, 08:26 AM   #9
Scooby Newbie
Member#: 66763
Join Date: Jul 2004
Location: Toledo, Ohio
04 WRX


When you get your AP you are required to load the first base map

Included is a white connector. You will plug this in to the white connector under the dash, you will need to plug the 2-green connectors in (which are also under your dash). You then choose the base map you want to flash and bam your done. It takes about 20-min to flash your first map.

From there on out you can switch maps using the realtime maps

You will noticed the car drives a heck of alot more smooth. Turbo spools quicker you do add some HP but Stg 1 is not a huge jump by any means. Drivablity is the most seen improvement
* Registered users of the site do not see these ads.
WRX_2NR is offline   Reply With Quote