Quote:
Originally Posted by Cougar4
We do have some pointers. Since it appears that the ignition switch isn't getting any power check fuse SBF-4 in the panel under the hood and see if it is blown out. If it is ok then see if voltage is getting to it. If you have no voltage there also then most likely the main fuse, SBF-1 is blown out. If fuse SBF-4 has voltage getting to it then there is a problem between the fuse and the output side of the ignition switch.
Whenever you have power problems like this the first thing to do is check all the fuses for a problem.
|
Cougar - I checked SBF-4 and the fuse is fine. I am getting 12 volts there as well. As you were saying, it must be an issue between the fuse and ignition switch. I have an after market alarm installed so perhaps that is causing it. Any pointers on where to start testing? TIA.