View Single Post
Old 08-11-2012, 12:31 AM   #21
Scooby Guru
Member#: 53443
Join Date: Jan 2004
Location: Anchorage, AK
2001 LL Bean Outback


USe your voltmeter to make all the tests. You will either have full voltage before or after the switch or something less. You should see the same amount of voltage you saw at the fuse if things are okay at the point you are testing. On the output side of the switch the green wire is the only one you need to check.

If you see something has been done to the white wire for the alarm system then you will need to remove the mod and splice the white wire back together.
* Registered users of the site do not see these ads.

Last edited by Cougar4; 08-11-2012 at 12:56 PM.
Cougar4 is offline   Reply With Quote