View Single Post
Old 05-14-2008, 04:35 PM   #1
RallySport Direct
Former Vendor
Member#: 33174
Join Date: Feb 2003
Chapter/Region: RMIC
Location: Salt Lake City Utah
Chat Email or Phone!

Default How To: 2008 STi Radiator Shroud

With the amount of track time that our 2008 STi sees, keeping the car cool is the most important thing. As it will allow us to run it harder for a longer period of time.

With this vehicle being so new its becoming a waiting game for Manufactures to come out with wanted parts in a timely manner. And parts that actually work, and function how they are suppose to.

Beatrush/Laile is a top notch Japanese company that has been working on Subarus for many years. And seeing many of their products on the GC and GD models, our expectations where high for quality, finish, and fitment.

Tools Needed:
Phillips screw Driver
Flat Head screw Driver
12MM socket or wrench.

1) Take the Phillips screw driver and take out the center of the clips that hold the ram air intake to the upper radiator support.

So now it looks like this. After you take both the clips off and pull out the Ram air out of the air box.

The ram air just slides out of the air box.

2) Now pop off the 2 clips that hold the upper grill onto the radiator support, using the flat head screw driver. (you only need to take out the 2 on the driver side of the car)

3) Get the 12MM socket and take off the 2 brackets that hold the secure the radiator to the top of the radiator support.

And it will look like this. After all the parts are removed out of the way.
* Registered users of the site do not see these ads.

Last edited by RallySport Direct; 04-01-2009 at 05:33 PM.
RallySport Direct is offline   Reply With Quote