View Single Post
Old 01-12-2021, 12:52 PM   #228
Scooby Newbie
Member#: 62941
Join Date: May 2004
Chapter/Region: MWSOC
Location: @brgperformance
2004 #LesboRacer


Originally Posted by Aczwild View Post
Would love to see where you mounted the Volvo EPS setup. Just pulled one from a ***8216;05 S40 for my ***8216;00 RS track car build.
I'm not sure where his is mounted but I removed the factory battery tray, drilled a giant hole to recess the pump motor down into the fenderwell and bolted it up there.

I'm using the model with the integrated reservoir.

I don't think the pump was having an issue after changing some other components around but I also added a little cooler in the return line.

My hoses are rather short this way as everything stays on the drivers side of the car. I use an AN adapter on the pressure feed with a hydraulic face seal type o-ring (the factory fitting is some oddball metric tube nut that I couldn't find anywhere).
The return, after having fitment issues with an AN adapter I ended up cutting off the stock return pipe and double crimping on some Parker 801 hydraulic hose for a return.

* Registered users of the site do not see these ads.
Barge is offline   Reply With Quote