View Single Post
Old 04-08-2006, 02:13 AM   #8
extremeconcepts
Scooby Newbie
 
Member#: 86175
Join Date: Apr 2005
Location: Torrington, CT
Vehicle:
2006 STI
Steel Gray

Default

nice well, i just finished installing my seats, so for anyone that has universal rails that came with the seats..... i used them to put myn in and all i did was cut the lower tabs off the stock seat rails just the 4 tabs that stick down from the slide it self..... and i put all 4 of the tabs in the car and bolted them down set the seat on top of it got it where i wanted it to be tac welded it took it all out.. and welded it all together and that was it very simple if you have any kind of mechanical incline. but since you have the brackets for your car that made it easier, although i had the option to lower, or raise, and slant the seat forward and tip the seat backwords to give the bottom more of a bucket to sit in. due to i could cut weld, or adjust the tabs to how i wanted them.
* Registered users of the site do not see these ads.
extremeconcepts is offline