View Single Post
Old 10-31-2017, 02:56 PM   #25
Scooby Guru
Member#: 90539
Join Date: Jul 2005
Chapter/Region: South East
Location: SWLA
My BOV goes


Originally Posted by KillerBMotorsport View Post
You can get a factory bellypan used for cheap, but that's going to provide more aero/cooling improvements than offer damage protection.

Of our pans I've seen involved in off track incidents, I've not seen a failure yet. The off road guys use hard-core belly pan setups, but a lot of track guys use the OEM pan or trimmed down versions of the OEM pan (access to filter and drain usually). We have seen a few come back dented from rod failure on drag cars, but never to a point of causing a leak. The pans are pretty tough. If you strike just the pan repeatedly or specifically JUST the pan I could see how it could fail, but you're talking a significant amount of force. My standard answer here is 'if you hit something hard enough to cause a complete pan failure (doesn't hold oil) then you've likely got much more expensive repairs to worry about than an oil pan'.
My car is a 95, and haven't ever seen one for the 93-01 cars. Maybe a dealer can order one.

If I get the pan from Oakos, will it be the cast version and come with the spacers/hardware? I already have your pickup and tray.
* Registered users of the site do not see these ads.
2slofouru is offline   Reply With Quote