View Single Post
Old 10-20-2002, 04:59 PM   #1
gabewrx
Scooby Newbie
 
Member#: 14688
Join Date: Jan 2002
Location: florida
Vehicle:
04 EVO!!!!
white i think!

Thumbs up STI headlights level switch install

ok i got this mod working .. it took some time and a lot of thinking lol


remember doing this will be at your own risk..

All the electronics you need to make the lights go "up/ and down" are inside the lights. no need for such thing as a "Black box".

you will need the level switch also.
tools: 10mm
wire cutters
radio shack 6 wire connector, male and female
6 diferent color wires , red,black,blue,green,orange,brown
soldering gun.
wire loom

step 1: have the sti head light on hand, cut the plug from the level motor , install the 6 pin connector "male".
do this on both lights

step 2: get enough wire to go from the right side head light to the left, on the right headlight connect the " 6 pin connector" to the end of the wires .., on the other side "driver side headlight,
get enough wire to go across the firewall, put the ends together
on the same oder on the same 6"pin connectors"
* Registered users of the site do not see these ads.
Attached Images
File Type: jpg wrx headlightmod.jpg (25.3 KB, 4397 views)
gabewrx is offline   Reply With Quote