View Single Post
Old 04-25-2008, 12:33 PM   #74
NASIOC Supporter
Member#: 90539
Join Date: Jul 2005
Chapter/Region: South East
Location: Lake Charles
My BOV goes


Originally Posted by keirnna View Post
Those are the valve cover gaskets that surround the spark plug holes. Who did you get that gasket kit from? I also don't see the plastic pieces that are shaped like a semi-circle included in your gasket kit. There are 4 on each head.

The ones under the one I circled are for the spark plug hole seals. This kit has every gasket and oring I needed except for the large oring on the oil cooler. If you're talking about those thick half-round pieces that are glued to the head, I'm just going to remove them and clean and reattach them with some ultra grey slicone. They aren't damaged.
I may change the orings for the injectors, but they are in very tight and I'm worried about damaging them. I can get those orings easily though.
* Registered users of the site do not see these ads.
2slofouru is offline   Reply With Quote