View Single Post
Old 01-03-2021, 11:19 PM   #5
TwistedAxles101
Scooby Newbie
 
Member#: 379235
Join Date: Jan 2014
Chapter/Region: MAIC
Location: Waynesboro VA
Vehicle:
2002 Impreza WRX
Blaze Yellow

Default

If you are pulling the engine from a 02-05 WRX or any STi, you need to disconnect the clutch fork. Once you remove your starter there will be a hex plug behind it, remove it. Take a long bolt from your plastic timing cover and thread it into the pin inside the hole you removed the hex plug from. Pull on the bolt until you pull the pivot pin out completely. This is a 100% necessary step.

Another necessary thing- you must use something (jackstand or jack depending on weather you have a lift or not) on the transmission to lift the engine mounts out of the subframe.
* Registered users of the site do not see these ads.

Last edited by TwistedAxles101; 01-03-2021 at 11:25 PM.
TwistedAxles101 is offline   Reply With Quote