Quote:
Originally Posted by SouthernScoobie
Jeff, I have a technical question, but I'm not sure if you'll have the answer.
For my kit, I plan on having my tuner set R bank values to the L bank TGVs so I can hijack the left side harness. My plan is to make a new harness that goes in between the current connectors (I will probably replace the connectors with more available ones due to my inability to find the stock TGV connectors) and use the "input" wire for my flex data.
Here's the question. Do you think I could also hijack the 5v OUTPUT off the same harness with the TGVs still in working order? Or do you think that would add too much load to a system only designed to power one device? This would make everything MUCH more streamlined and less complicated. One little harness and I'm golden.
|
I dont believe it'll be too much benefit since you need to power the FF sensor with 12v anyway.