I can see a direct correlation between the CLB values and the BCS % use. I was pondering about your theory of not maxing out the BCS, which is reasonable, and thus I think I'll keep my values between 70-90 and just mess w/ the ABC. I figured since I've tested w/ 5 turns out that I got 15.5psi+/-, thus it can't be too far to obtain 16-16.5psi just by turning the ABC out more. I did a quick test and I can go as far as 10 turns out if necessary. I'll do some logging tomorrow and see what psi I get w/ turns out and go from there.

Right now I know w/ the current CLB vales of -100 from the previous ones posted I'm only utilizing the BCS 1.3% more than 70-90 since my values in Log 3 are 70-90 from 3250-5500rpm+. I'm sure turning the ABC will allow me to obtain 16-16.5psi before the 10th turn, somethign which I hope I will not have to use.