View Single Post
Old 03-19-2006, 09:24 PM   #1
txl146
Scooby Guru
 
Member#: 32459
Join Date: Feb 2003
Chapter/Region: Tri-State
Location: NY
Vehicle:
02 WRX VF34 (SOLD)
Junior Tuned 301whp

Default Instruction: Pink injector install on 02-03 WRX with PHOTO

Click here for TURBO install

I spent 3 hours today installing pink injectors and removing stock turbo in near freezing weather. It took me 1 1/2 hours trying to unbolt one of 3 10mm bolt holding a breather cover on driver's side, which I later find out is not necessary to remove (optional)!!!

- Pull the ignition fuse (#11) from the fuse box under the steering wheel column. Crank the engine for a few times to relieve fuel pressure in the line.

Hope you find instruction and photos useful.

Tools you need:

wrench, 10, 12, 14mm sockets
plier
zip ties
PB blaster

Remove two 12mm bolts that hold IC


Remove BPV by removing two 12mm bolts (be careful not to lose a gasket)

Remove TB hose

Remove turbo to y-pipe hose

Remove two hoses (driver's side has one hose)
* Registered users of the site do not see these ads.

Last edited by txl146; 08-11-2011 at 09:46 PM.
txl146 is offline   Reply With Quote