View Single Post
Old 11-19-2010, 02:43 PM   #1725
Scooby Specialist
Member#: 216135
Join Date: Jul 2009
2011 Civic SI
STX #66, 06 S2000 STR 180


Originally Posted by utra View Post

The mechanic took apart the transmission and found that "the clutch was disentegrating". There were bits of clutch everywhere in the transmission. The mechanic had the clutch inspected by the clutch doctor, the only thing other than that there was unusually extreme wear was that there was an large amount of what he thought to be anti-seize inside the housing. The mechanic then resurfaced the flywheel. The mechanic also noted that the shaft the throwout bearing is mounted on has a little indentation in it.
This says either the release/throw out bearing or the pilot bearing in the flywheel has broke open or failed as they are both sealed grease bearings.
* Registered users of the site do not see these ads.
09rexwagon is offline   Reply With Quote