View Single Post
Old 01-17-2008, 11:05 AM   #56
Tea cups
Scooby Specialist
 
Member#: 103136
Join Date: Dec 2005
Default

probably one of the following:
1. your are not in test mode (diagnostic connectors not connected). To verify if you are in test mode turn the ignition to on (without attempting to read with Ecuflash) and after a few seconds the radiator fans should cycle.
2. You need to wait until prompted to turn the ignition on and then immediately hit ok.
3. You are choosing the wrong read method (should be 2005-2007 dbw wrx/sti for an 06 2.5i).

All of this is in the main ecuflash troubleshooting faq linked in this faq.
* Registered users of the site do not see these ads.
Tea cups is offline   Reply With Quote