View Single Post
Old 02-28-2005, 01:06 PM   #5
dwx
Scooby Guru
 
Member#: 8343
Join Date: Jul 2001
Chapter/Region: MWSOC
Location: Atlanta, GA
Vehicle:
2005 2012 Jeep
2013 DGM BRZ

Default

They mount completely different, there is no way you are going to be able to use it on an RS as is. The RS bumper beam has two "rails" that slide into the unibody of the car and are bolted with 4 large bolts near the battery and the abs pump, facing downward.

The GD has a flat bumper beam that bolts to the face of the unibody using 6 bolts, 4 large ones and 2 smaller ones. The bolts face towards the back of the car. Those 4 large bolts are what the APS beam uses.

What you might be able to do is have someone weld two rails onto the APS beam, drill and tap some large holes.
* Registered users of the site do not see these ads.
dwx is offline   Reply With Quote