View Single Post
Old 09-07-2017, 01:57 AM   #11
jigga
Scooby Guru
 
Member#: 9960
Join Date: Sep 2001
Location: in bed...
Vehicle:
2002 Impreza WRX
WRBlue Perl

Default

Quote:
Originally Posted by KillerBMotorsport View Post
We're not a company known for doing anything on the cheap. The advanced casting process we use allows for thinner, stronger, and lighter products.

A good comparison is look at our intercooler end-tank inlet/outlet. We can have a horn shape taper at the edge, a thinner wall provides a larger opening (more flow), and the thin wall means better exposure with less turbulence going into and out of the core.

For the pan is means no tapered walls, which means no compromise to oil capacity, and an small improvement in strength, without a significant weight tax.



From a performance perspective, there's no change. Both versions can handle anything you can throw at them. The cast pan is now our mainstream product, but we are still making the weld-porn fabricated on a made-to-order basis.
I'm not insinuating that you are a company that does things on the cheap. I could only make the deduction that since you no longer have a skilled professional slaving over welding up these oil pans from individual pieces of aluminium, and you can now knock these things out like proverbial sausages, savings might be passed on to the consumer. Would you say that casting the oil pans is a more labour intensive process than your previous construction technique?
* Registered users of the site do not see these ads.
jigga is offline   Reply With Quote