Quote:
Originally Posted by Harry
Same issue on the driver's door of my 2010 STI. Now has one dime-sized rust bloom and 3 smaller ones moving up the pillar, so definitely rusting up from bottom.
Any thoughts on drilling a drain hole on the inside of the door, at the bottom where the inside and outside panels separate?
I think I'll try that and flood the cavity with rust stop, via the top hole that holds in the corner of the rubber door seal. Not ready to cut the rust out - looks beyond my bodyworking skills.
- Harry
|
That is exactly what I did after welding the patch. I left a small hole on the bottom where the panels separate and injected some rustproofing in the cavity