Thread: Newbie log help
View Single Post
Old 01-23-2020, 12:45 AM   #1
Scooby Newbie
Member#: 498493
Join Date: Mar 2019
Default Newbie log help


I can't post attachments but I'll put a link to my romraider thread:

I'm just getting started tuning my 05 USDM WRX. Only mods are Snorkus delete (yes, just for the noise) and CBI. I have a catless DP and UP but wanted to get a handle on tuning first plus awaiting a proper WBO2 (it's coming).

I looked for a decent base map. Found this one by Testes1010 which had good reviews and I'm running E10 92oct so should be safe.

Looking at it I thought it was a bit too aggressive on boost so pulled that down then started logging. Had immediate FBKC and dropping IAM even out of boost. So following some threads I changed the parameters for IAM learning to above 1g/rev which seemed to be recommended to tune out false knock.
Still having issues (perhaps not the best map in hind sight) on my initial low RPM/Throttle logs. Added fuel, went back to stock timing and started pulling that back. Thoughts on what I'm working with now are appreciated (logs at bottom).

It seems like I need to add some fuel and also pull timing at ~2800rpm-1.3g/rev and blend it into what seems to be working at 3200-1.5g/rev

There isn't much to learn from learning view as yet since I haven't run a tune long enough to get much adjustment mainly because the issues have been easy to spot.

Any insight would be great. I understand the theory but this it somewhat new to me.

Logs: ... 2-3-7-9-10 ... x=14131.64 ... 9-10-11-13

* Registered users of the site do not see these ads.
Grantmac is offline   Reply With Quote