View Single Post
Old 11-26-2017, 11:50 AM   #3
carnz-pj-410
Scooby Specialist
 
Member#: 110994
Join Date: Mar 2006
Chapter/Region: MAIC
Location: BALTIMORE
Vehicle:
1995 Turbo Impreza
701whp 05 2.5XS Forester

Default

Quote:
Originally Posted by elislider View Post
i'm running into this issue now, working on a JDM v7 EJ205 w/AVCS swapped into a 06 Forester XT, so far everything else swaps and bolts on, but the rear cam sensors are different (2 wire) and the USDM ones (3-wire) don't fit into the same holes. I'm considering trimming some of the plastic one the USDM cam sensors so they fit and be can be bolted down... but i'm not sure if the cam pickups are the same.. trying to find pictures to compare now

I have a sinking feeling that even if I do this, the USDM Forester ECU won't be able to read the cam triggers correctly because the sensors and/or cam pickups are different
The cam pickups are different you have to swap the cams to usdm to work with your ECU.

The JDM 2 wire sensors are magnetic type and the USDM 3 wire are Hall Effect, the triggers on the camshafts are different to reflect this as well
* Registered users of the site do not see these ads.
carnz-pj-410 is offline   Reply With Quote