View Single Post
Old 02-22-2004, 09:06 PM   #1
bobturismo
Scooby Specialist
 
Member#: 42145
Join Date: Aug 2003
Location: cruizin' down the street in my
Vehicle:
6-4 jockin da bish-
es and slappin the hoes.

Default Is my ECU dead?!?!

i just did a ej2.2t ecu and harness swap into my 95 impreza 1.8, and i don't have any spark and the output from the ecu to energize the relay doesn't output any power and i hooked up an alarm L.E.D. for a CEL, one side ign and one side i believe is the MIL wire is, and it never flashes. i don't have my dash in, but that shouldn't make a difference right? the ECU is Automatic and the car is Manual, i put ignition power to the wire for a park and nuetral switch then grounded 2 other wires (b9,B10 i believe) for the nuetral safety switch

the only other thing is that i didn't have one of the crank and cam sensors for the legacy so i soildered the impreza 1.8 sensors in should be the same as the legacy, aren't they, minus the shields?
* Registered users of the site do not see these ads.
bobturismo is offline   Reply With Quote