View Single Post
Old 03-29-2011, 11:25 PM   #84
Ogden
Scooby Specialist
 
Member#: 1748
Join Date: Jun 2000
Chapter/Region: NESIC
Location: Boston, MA, USA
Vehicle:
'09 Outback Sport
OBP over DGM

Default

Quote:
Originally Posted by littlewhitewagon View Post
My idea would be just to not include the BIU. I would just use the stalk switch to go to my own relay and wiring assembly which would join the rear segment that goes to the bulb. I haven't had time to pull everything apart since I don't have the stalk yet in order to see if there are pins populated on the car side. My guess is that there are no wires there.
That would be perfect. The OEM switch has the rear fog switch as a spring-loaded function. You turn it to the rear fog position and it springs back to the front fog position. I presume that this sets it up such that the rear fog runs only until the car is shut off and requires you to toggle it again once you restart the car if you want it on again. It keeps us from looking like idiots driving around with our rear fog lamps on all the time.

That said, the switch may require a specific relay to mimic that function, as it cannot simply be set to "on".
* Registered users of the site do not see these ads.
Ogden is offline   Reply With Quote