View Single Post
Old 08-09-2018, 04:49 PM   #52
NilesM
Scooby Newbie
 
Member#: 489927
Join Date: Aug 2018
Location: Colorado Springs
Vehicle:
2009 Impreza 2.5i
White

Default

Quote:
Originally Posted by Tracy4381 View Post
We're wanting to put NGK wires and plugs on but with the engine swap, we're not 100% sure what part numbers we need. Two of the wires are longer than the other two - two are approx. 23" long and 2 approx. 18" long. We tried calling NGK direct, but wire lengths are not part of their specs and their parts reps couldn't tell me what set we'd need.
I just did this swap. The JDM 2.0 had the coil mounted to the center of the intake and the wires were all the same length. I used the 2.5 intake which has the coil towards the back and off to the side. The spark plug wires were different lengths. This suggests to me that the previous owner likely used the 2.5 intake setup and the wires you order should be for the 2.5 not the 2.0.
* Registered users of the site do not see these ads.
NilesM is offline   Reply With Quote