View Single Post
Old 06-23-2021, 01:28 AM   #1
JrodKC
Scooby Newbie
 
Member#: 518191
Join Date: Aug 2020
Chapter/Region: MWSOC
Vehicle:
2009 Legacy 2.5i
Gray

Default Oh **** ps bracket bolt

Hey guys I was replacing ps pump on my 09 legacy 2.5i. When I was reinstalling the bracket to the car, I mixed up and put a long bolt in the back and I wrenched it unfortunately until the bolt head snapped and when researching a short bolt in the front left and the rear and the long bolt went in the front right. Unfortunately the previous owner replaced it at some point and had installed 2 long bolts and a short bolt but I mixed up where they had them. Looking at the front left there were threads imprinted on the block way past where it should have stopped in hindsight that was obviously where they had the long bolt before I took it apart. Long story but I have a little liquid coming around the threads of the wrong bolt I installed in the rear of tge bracket. Iím not sure if I cracked the head or what but kinda worried any input or suggestion is much welcomed thanks from a rookie in a pickle!
* Registered users of the site do not see these ads.
JrodKC is offline   Reply With Quote