|05-31-2010, 07:02 PM||#1|
Member Sales Rating: (59)
Join Date: May 2002
With some new things on the horizon I am parting out my time attack build. I have listed prices beside items but all are obo and combined items will get a discount.
Located in Las Vegas, NV.
I will be adding gear as I find it... Prices do not include shipping! Everything listed is for sale - things shown but not listed are not for sale!
PM or post here for more info on condition, picture, etc. Items can fit 93-07 impreza unless indicated.
Car is sold
OEM parts (modified parts list below):
Aftermarket/Mod. parts (also listed elsewhere)
vvvvvvvvvvvvv SOLD vvvvvvvvvvvv
400 - 1000cc UR top feed injectors with sidefeed conversion fuel rails, low impedance
200 - fuel lines and fittings (-6) for parallel fuel setup with inline fillter.
$5 - Accordion shifter boot
100 - SARD FPR
$50 - Rear jdm beam, 93-01
300 - STI Triple pillow lateral links
060 - Cusco front strut bar, 93-01
100 - Forge atm bov
300 - R180 rear 4.44 R&P and case.
220 - Cusco Engine and Transmission mounts, 5spd
90 - APR GT-II rear spoiler
1000 -EJ205 heads with BC valvetrain and BC 280/280 cams, freshly rebuilt and resurfaced.
$280 - TypeRA Roof vent - 93-01, no interior trim
600 - R180 Cusco Rear LSD diff
090 - Defi-Link 52mm Electronic Boost Gauge
120 - Defi-Link 52mm Electronic Oil Tem. Gauge
140 - Defi-Link 60mm Electronic Oil Pressure Gauge
1500 -Type RA 4.44 5 spd transmission
130 - Defi-Link 52mm Electronic EGT Gauge
150 - Defi-Link 52mm Electronic Fuel Pressure Gauge
170 - Defi-Link 115mm Electronic Tachometer
070 - Defi control unit ver.1
600 - Full Defi set
050 - 6 gauge center holder
250 - Rear sti 5x100 hubs with ARP extended studs
600 - Rear brembos with rotors (5x100) and DS2500 pads
050 - Cusco rear diff brace, 93-01
450 - Sparco Pro2000 driver's Seat - small tear on side from belt, come with slider & bracket
050 - Projector headlights
030 - Blacked out clear corners
170 - Front sti 5x100 hubs with extended ARP studs
175 - Sparco Steering wheel (blue) with adapter
400 - Zerosports reverse cowl fiberglass hood with hood pins, 98-01
900 - Q-Rack 11.5:1 Quick Steering Rack, 93-01
2200 -Prodrive Alcon calipers with Hawk DTC-60 & Prodrive rotors, very low miles
150 - GT-Spec Rear Ladder brace, 93-01
250 - STi alloy control arms, 93-01, or GD wago
100 - Version IV bumper (modified) with lightweight beam, 93-01n
350 - Watanabe RWD center differential, ph1 center diff (<98), comes with front axle stubs.
900 - Advan TCII 17 x 8.5 gold rims, 5x100, in relatively rough shape but true. - PENDING -
160 - Ganador Mirrors, 93-01
900 - FP Green 3” 8cm, internally gated Turbo,
160 - Whiteline heavy duty adjustable -race- 27mm front swaybar, BSF33XXZ
140 - Whiteline heavy-duty adjustable 24mm rear swaybar, BSR36XZ
080 - Whiteline heavy-duty rear swaybar mount
090 - Front adjustable pillow ball endlinks
140 - High-flow/pressure oil pump, modified 12mm
1700 -Perrin rotated GT35 .63 kit with 44mm external TIAL, downpipe with wastegate routing, up-pipe coated.
250 - Greddy Intercooler core
090 - Mine's front under brace, 93-01 -PENDING-
$40 - turbo coolant tank - painted blue
040 - Zerosports thermostat
380 - Zerosports 4-puck Exedy clutch kit, 5spd pull (93-05 turbo wrx), 7.5mm left on disk, comes with 8mm aka lots left!
200 - IXIZconcepts race-modified AOS
$10 - GReddy shift knob
150 - Greddy oil cooler with thermostat, needs core fixed or replaced, comes with -10AN lines
200 - Sparco Speed Passenger Seat - like new, comes with bracket
$20 - oem front swaybar, wagon turbo GD
80 - NRG quick release v.1.5
130 - Front brembo Ferodo DS2500 pads - new in box.
160 - Custom aluminum piping for rotated intake manifold & v-mount
220 - Koyo Radiator (for RX7 FD - works well for V-mount)
325 - Radiator,hoses and piping to make v-mount (the whole thing minus IC!)
100 - GT-Spec Fender Braces 93-01
200 - Schroth 5-pt driver, 4-pt passenger ASM harness
070 - Walbro fuel pump
400 - Cusco Safety 21 8-pt Roll Cage (steel cage with door bars) - 93-01, may fit GD.
400 - Hydra EMS ver.2.17 with wideband (can be used for any non-avcs setup)
1000 - Stance GR+ Pro SS-D valved for 12k/12k springs, come with a set of 10K springs, very low miles. 02-07, 5x100.
300 - GT-Spec Rear strut bar with trunk brace, 93-01
2600 -Built STi EJ257 with H-beam rods, CP Pistons, & ACL bearings - fresh rebuild with new pistons, refurbed crank, & bearings by AQ Motorsprots/Harman Motive
200 - STI Triple pillow trailing arms
^^^^^^^^^^^ SOLD ^^^^^^^^^^^^^
Last edited by kingsubi; 10-09-2010 at 05:30 PM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|1995 Legacy L shell lots of goodies||hybridpatient95||Legacy Specific Parts||7||09-21-2008 09:28 AM|
|1995 subaru legacy L shell lots of goodies FS NJ||hybridpatient95||Private Vehicle 'For Sale' Classifieds||2||09-11-2008 12:20 AM|
|Parting out my car *Lots of goodies*||Cashis||Bay Area Impreza Club Forum -- BAIC||15||06-11-2006 12:12 PM|
|fs:A lot of goodies in NY Parting out my car||JERMAINE||Private 'For Sale' Classifieds||93||01-31-2005 02:24 PM|
|Parting out my car!!! lots of goodies...||AmirWRX||Bay Area Impreza Club Forum -- BAIC||46||04-08-2004 02:39 AM|