2002 wrx coolant hoses

Spooked321 · 05-22-2020, 08:52 PM

Helping a friend swap an engine into his rs and we are having a difficult time finding info on what these 2 hoses are for on a stock wrx https://imgur.com/a/jGGU9hm
Any info would be appreciated

* Registered users of the site do not see these ads.

GarrettPlusBugeye · 05-22-2020, 11:14 PM

They connect the turbo coolant reservoir to the main radiator.

Shinji N · 05-23-2020, 03:24 AM

Is the hard time because you're reusing the stock gc8 radiator and there's nowhere to connect them to?

Samurai Jack · 05-23-2020, 12:18 PM

Quote:

Originally Posted by Spooked321

... we are having a difficult time finding info on what these 2 hoses are for on a stock wrx

Where are you looking?
Both hoses are easily orderable from the Dealer.
You could also just purchase coolant hose from an auto parts store of the same size and any length you want.

Or you can buy a complete kit like this: https://www.rallysportdirect.com/par...y-hose-kit-red

It just works better if the are pre-formed.

NickVu · 05-23-2020, 02:13 PM

One is the pressured hose, connects to the pressure side nipple of the radiator. Older RS radiators won't have that nipple. Tap and add one.

The other is a pressure relief, on most wrx's it goes directly to the lower plastic reservoir since there's no lower radiator cap. If you have a lower radiator cap, you can tee it to the reservoir line.

05-22-2020, 08:52 PM	#1
Spooked321 Scooby Newbie Member#: 484048 Join Date: Mar 2018	2002 wrx coolant hoses Helping a friend swap an engine into his rs and we are having a difficult time finding info on what these 2 hoses are for on a stock wrx https://imgur.com/a/jGGU9hm Any info would be appreciated * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-22-2020, 11:14 PM	#2
GarrettPlusBugeye Scooby Newbie Member#: 455087 Join Date: Sep 2016 Location: Albany, OR Vehicle: 2002 Impreza WRX WRB	They connect the turbo coolant reservoir to the main radiator.

05-23-2020, 03:24 AM	#3
Shinji N Scooby Specialist Member#: 3987 Join Date: Feb 2001 Location: Los Angeles, CA Vehicle: 1998 2.5RS Blue	Is the hard time because you're reusing the stock gc8 radiator and there's nowhere to connect them to?

05-23-2020, 02:13 PM	#5
NickVu Scooby Newbie Member#: 27525 Join Date: Oct 2002 Chapter/Region: SCIC Location: Orange County Vehicle: 03 wrx wagon yellow	One is the pressured hose, connects to the pressure side nipple of the radiator. Older RS radiators won't have that nipple. Tap and add one. The other is a pressure relief, on most wrx's it goes directly to the lower plastic reservoir since there's no lower radiator cap. If you have a lower radiator cap, you can tee it to the reservoir line.