|
|
|
|
Thread Tools | Display Modes |
01-15-2015, 02:03 PM | #1 |
Scooby Specialist
Member#: 20437
Join Date: Jun 2002
Chapter/Region:
Tri-State
Location: Downingtown, PA
Vehicle:1999 Impreza RS STI Ver7 |
Need Help/Confirmation about heater hoses flow/routing - 99 RS with EJ207
Hi,
I have been rebuilding my swapped 1999 RS with EJ207 Ver 7 engine over the last few months and now I am starting to put everything back together. I also decided to replace heater hoses with new ones, since pretty much most other rubber hoses have also been replaced. But as I started to look at the diagrams of the heater hoses to see which ones I need to buy I got a little confused, especially since I originally did the swap almost 10 years ago and don't remember which hoses I used. So first I just wanted to see if anyone can confirm or correct my understanding of the coolant direction flow. Here is what I got. Does that seem correct? Here is the pictures of the heater hoses right after I took the engine out. So to replace these heater hoses with new ones, I will need to get Heater Outlet hose from 99 RS, and Heater Inlet hose from 02-03 WRX. Does that seem right? Thanks, Alex
* Registered users of the site do not see these ads.
|
Thread Tools | |
Display Modes | |
|
|