Legacy fiberglass bodyparts group buy

[David Carter]

This Has been Offered on the Legacy Mailing List, STi-List and someone told me to mention it here.There has been a demand for fiberglass bodywork and i went looking, I do not make these parts but am commisioning them on behalf of all those who want one
ok i did some figureing and calling around so bear with me.. and figure you
own math..

I measured my 91 LS WGN's hood, Front fenders, Front & Rear Bumpers.

The Hood measured out to about: 8'.3" sq Ft.
the mold would cost $255.00 and the part would cost $64.00 (rounded up)

The Fender measured out to about 6'.3" sq Ft
the mold would cost $189.00 and the part would cost $47.50 (rounded up)

The Front Bumper measured out to about 8'.1" sq Ft
The mold would cost $243.00 and the part would cost $60.75 (rounded up)

The Rear Bumper measured out to about 9'.1" sq Ft
The mold would cost $273.00 and the part would cost $68.25 (rounded up)

The Part price is under the assumption that the mold already exsists.. Which
it dosen't..

Group Prices.

First i called around for a turbo Hood it came to $320.00 and then i priced
an RS bumper which came to $249.00, the Scoupe came to about $90, and they
couldn't find the price for the vents these prices were obtained from Macco,
an autobody shop for those not in the US.

The following group price is for the Turbo Hood with holes cut and under the
assumption that a Turbo hood will be needed to be purchaced to make the mold.
these prices were also made with the value that a min of 5 people were going
in on it. the price will be higher is less come in on the deal and less if
more than 5 people come in on the deal. these prices are not includeing any
modifications (hood scoup/flares/etc..)

TurboHood :+320.00
Mold: +255.00
Part + 64.00
Part + 64.00
Part + 64.00
Part + 64.00
Part + 64.00
------------------------------------
Total: =895.00
Split 5 ways: 179.00
Price if hood is donated or is available for free: 115.00

The fender is easy as i can use my fenders for the molds

Mold: +189.00
Part: + 47.50
Part: + 47.50
Part: + 47.50
Part: + 47.50
Part: + 47.50
-----------------------------
Total: =426.50
Split 5 ways : $85.30

Front bumper is figured with my bumper and not the RS as i do not own an RS
bumper to measure..

Mold : +243.00
Part: + 60.75
Part: + 60.75
Part: + 60.75
Part: + 60.75
Part: + 60.75
---------------------------
total: =546.75
add :249.00 for RS bumper and divide by 5 for apoxamate price for RS legacy
bumper
Split 5 ways : $109.35

Rear bumper is off of my WGN

Mold: +273.00
Part: + 68.25
Part: + 68.25
Part: + 68.25
Part: + 68.25
Part: + 68.25
----------------------------
Total: = $614.25
Split 5 ways : $122.85

Any Donated Part will be shipped back at my own expence. So you will get your
originals back. Otherwise UPS charges will apply. if there is a specific year
a couple of you want i will call Macco and find out how much the hood costs
and add it to the price and after the mold is made return the hood and refund
that money between the partys involved..

David Carter

P.S this has been forwaded to the STI list from the legacy list for all those
that might be interested...

* Registered users of the site do not see these ads.