Garage sale... Need to sell this stuff.

fiberedimage · 10-07-2008, 05:04 PM

Ok, heres what I got....

Silver K&N Typhoon intake. Comes with heat shield, gaskets and MAF heat shield. I had this on the car for about 3K miles. $70.00 OBO **SOLD** Thanks

Silicone turbo inlet tube with after MAF adapter. Pretty much like a Samco or Gimmic tube. I chose a different one because it was blue

Never used. Paid $265.00 sell for 225.00

Generic short ram intake, I think I made about 350 some odd HP with this intake. K&N type filter. $45.00 OBO

Stock boost gauge, also comes with factory wiring harness for plug and play install. $65.00 OBO

Dual gauge cluster gauge pod. $20.00 shipped **SOLD** Thanks

Catless stainless steel up pipe. I had a few issues with the install on this, just being honest. But I was not connecting it too the header so I don't think it was sitting right. Plus I went with an EWG set up so I couldn't use this anyway. $50.00 OBO

http://i115.photobucket.com/albums/n292/Th...ff/IMG_0073.jpg

Now, for the stuff that I dont have pictures for...

Full FMIC piping from SS AutoChrome. Comes with couplers and t-bolt clamps and radiator over flow tank. Only needs a turbo outlet to IC pipe coupler and a core you can pick up from SS AutoChrome. I had one on my STi and I loved it! Perfect for stock or upgraded turbo. Still kept a quick spool with the FMIC and it did its job damn good! Sell for $80.00 firm!

ATI center 3 gauge pod. Replaces factory clock. Also has the trim ring and 2 Prosport gauges in it right now. Boost and EGT. Boost has sending unit but no inline filter, EGT does not have a sending unit but can be obtained easily through prosport or some other places have it Im sure.

Stock pics to give you an idea

http://i115.photobucket.com/albums/n292/Th...i/atiWRXpod.jpg
http://i115.photobucket.com/albums/n292/Th...onfaceplate.jpg

Purchased for a total of $350.00 for everything. Selling for 250.00. These are the electric gauges with the sweep. The colors are red and white. Works perfectly and only used for 1500 miles.

Door handle for the inside door pannels, Ill try to get a pic of this later. 10.00 apiece.

Well, I thinks thats about it. Ill try to get some pics up for the stuff I dont have pics for yet. My house was broken into and I dont have a camera or a computer so bare with me.

If anyone is interested in this stuff let me know. Email me with offers and we can discuss. My paypal email is [email protected]

Thanks!

Paul

* Registered users of the site do not see these ads.

cubedweller · 10-07-2008, 05:23 PM

email sent re: typhoon intake

bmak21 · 10-07-2008, 10:29 PM

the cluster gauge a knock off or the real thing?

txl146 · 10-07-2008, 10:34 PM

dual bezel... is that the scratch or dust on the bezel?

Kawikid20o2 · 10-07-2008, 10:53 PM

pming you about intake.

fiberedimage · 10-08-2008, 09:09 AM

Cluster gauge is the real deal. I cant see the picture here hat work because of where its hosted, the last time I looked at it everything was ok, its probably dust... so I'm assuming that's what it is.

Up for today!

Thanks for the PM's, Ill be responding shortly.

rexu · 10-08-2008, 11:57 AM

Payment sent for the guage pod. See PM
Thanks man

fiberedimage · 10-08-2008, 12:24 PM

Thanks guys for the purchase, Ill be shipping your stuff out today when I get home from work.

Still got plenty of stuff left! make me some offers!

Kawikid20o2 · 10-08-2008, 12:46 PM

Just waitin on paypal email. pm me! thanks!

Kawikid20o2 · 10-08-2008, 03:36 PM

payment sent K&N Typhoon sold to me!

fiberedimage · 10-08-2008, 09:50 PM

So the Intake and the gauge cluster bezel are gone. The other stuff is still available.

Just in case someone says anything, I had recieved 2 payments for the intake. My Paypal address is displayed up top, I considered the first person to have the payment (since it does show it in order recieved in pay pal) to me the new owner. Sorry for any confusion but I did refund the payment to the later sender.

Up to the top!

haberkorn · 10-08-2008, 10:27 PM

How much for the Maf tube alone i don't need the inlet...pm me a price shipped

Thanks

Kawikid20o2 · 10-08-2008, 10:31 PM

Quote:

Originally Posted by fiberedimage

So the Intake and the gauge cluster bezel are gone. The other stuff is still available.

Just in case someone says anything, I had recieved 2 payments for the intake. My Paypal address is displayed up top, I considered the first person to have the payment (since it does show it in order recieved in pay pal) to me the new owner. Sorry for any confusion but I did refund the payment to the later sender.

Up to the top!

I didn't receive a refund does this mean that I am the new owner?

rexu · 10-13-2008, 02:16 PM

Where is the shipping info???

Kawikid20o2 · 10-14-2008, 01:07 PM

Got the Typhoon today thanks!

10-07-2008, 05:04 PM	#1
fiberedimage Scooby Newbie Member Sales Rating: (11) Member#: 115765 Join Date: May 2006 Chapter/Region: MWSOC Location: Louisville KY Vehicle: 2008 WRX STi Black	Garage sale... Need to sell this stuff. Ok, heres what I got.... Silver K&N Typhoon intake. Comes with heat shield, gaskets and MAF heat shield. I had this on the car for about 3K miles. $70.00 OBO SOLD Thanks Silicone turbo inlet tube with after MAF adapter. Pretty much like a Samco or Gimmic tube. I chose a different one because it was blue Never used. Paid $265.00 sell for 225.00 Generic short ram intake, I think I made about 350 some odd HP with this intake. K&N type filter. $45.00 OBO Stock boost gauge, also comes with factory wiring harness for plug and play install. $65.00 OBO Dual gauge cluster gauge pod. $20.00 shipped SOLD Thanks Catless stainless steel up pipe. I had a few issues with the install on this, just being honest. But I was not connecting it too the header so I don't think it was sitting right. Plus I went with an EWG set up so I couldn't use this anyway. $50.00 OBO http://i115.photobucket.com/albums/n292/Th...ff/IMG_0073.jpg Now, for the stuff that I dont have pictures for... Full FMIC piping from SS AutoChrome. Comes with couplers and t-bolt clamps and radiator over flow tank. Only needs a turbo outlet to IC pipe coupler and a core you can pick up from SS AutoChrome. I had one on my STi and I loved it! Perfect for stock or upgraded turbo. Still kept a quick spool with the FMIC and it did its job damn good! Sell for $80.00 firm! ATI center 3 gauge pod. Replaces factory clock. Also has the trim ring and 2 Prosport gauges in it right now. Boost and EGT. Boost has sending unit but no inline filter, EGT does not have a sending unit but can be obtained easily through prosport or some other places have it Im sure. Stock pics to give you an idea http://i115.photobucket.com/albums/n292/Th...i/atiWRXpod.jpg http://i115.photobucket.com/albums/n292/Th...onfaceplate.jpg Purchased for a total of $350.00 for everything. Selling for 250.00. These are the electric gauges with the sweep. The colors are red and white. Works perfectly and only used for 1500 miles. Door handle for the inside door pannels, Ill try to get a pic of this later. 10.00 apiece. Well, I thinks thats about it. Ill try to get some pics up for the stuff I dont have pics for yet. My house was broken into and I dont have a camera or a computer so bare with me. If anyone is interested in this stuff let me know. Email me with offers and we can discuss. My paypal email is [email protected] Thanks! Paul * Registered users of the site do not see these ads. Last edited by fiberedimage; 10-08-2008 at 01:03 PM.

10-08-2008, 11:57 AM	#7
rexu Scooby Specialist Member Sales Rating: (51) Member#: 149859 Join Date: May 2007 Chapter/Region: South East Vehicle: 2002 WRX	Guage pod Payment sent for the guage pod. See PM Thanks man

10-13-2008, 02:16 PM	#14
rexu Scooby Specialist Member Sales Rating: (51) Member#: 149859 Join Date: May 2007 Chapter/Region: South East Vehicle: 2002 WRX	Shipping Where is the shipping info???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Garage Clean out! Need to move this stuff FAST!!!	bxracer69	Suspension/Brakes/Handling	21	04-24-2007 09:03 AM
Garage Clean out! Need to move this stuff FAST!!!	bxracer69	Exterior/Styling	4	04-19-2007 12:46 PM
Garage Clean out! Need to move this stuff FAST!!!	bxracer69	Engine/Power/Exhaust	3	03-19-2007 04:57 PM
need to sell this stuff asap, OR	PSM 04'WRX	Private 'For Sale' Classifieds	66	09-05-2006 05:30 PM
WRX goodies, garage sale need to move this stuff	eatus ravenous	Private 'For Sale' Classifieds	45	04-25-2006 08:08 PM

10-07-2008, 05:23 PM	#2
cubedweller Scooby Newbie Member Sales Rating: (0) Member#: 181164 Join Date: May 2008 Chapter/Region: MWSOC Vehicle: 2002 Wagon SRP	email sent re: typhoon intake

10-07-2008, 10:29 PM	#3
bmak21 Scooby Guru Member Sales Rating: (42) Member#: 165379 Join Date: Nov 2007 Chapter/Region: NESIC Location: Bahston Vehicle: VTEC GOOOOOOOOOOOOOO BWWWWAAAHHHHHHHHHHHHHHHH	the cluster gauge a knock off or the real thing?

10-07-2008, 10:34 PM	#4
txl146 Scooby Guru Member Sales Rating: (145) Member#: 32459 Join Date: Feb 2003 Chapter/Region: Tri-State Location: NY Vehicle: 02 WRX VF34 (SOLD) Junior Tuned 301whp	dual bezel... is that the scratch or dust on the bezel?

10-07-2008, 10:53 PM	#5
Kawikid20o2 Scooby Specialist Member Sales Rating: (35) Member#: 86291 Join Date: May 2005 Chapter/Region: NESIC Location: New Fairfield, CT Vehicle: '97 LegaSTi-2.5XTR '96 BrightonCoupeWRX-SR30	pming you about intake.

10-08-2008, 09:09 AM	#6
fiberedimage Scooby Newbie Member Sales Rating: (11) Member#: 115765 Join Date: May 2006 Chapter/Region: MWSOC Location: Louisville KY Vehicle: 2008 WRX STi Black	Cluster gauge is the real deal. I cant see the picture here hat work because of where its hosted, the last time I looked at it everything was ok, its probably dust... so I'm assuming that's what it is. Up for today! Thanks for the PM's, Ill be responding shortly.

10-08-2008, 12:24 PM	#8
fiberedimage Scooby Newbie Member Sales Rating: (11) Member#: 115765 Join Date: May 2006 Chapter/Region: MWSOC Location: Louisville KY Vehicle: 2008 WRX STi Black	Thanks guys for the purchase, Ill be shipping your stuff out today when I get home from work. Still got plenty of stuff left! make me some offers!

10-08-2008, 12:46 PM	#9
Kawikid20o2 Scooby Specialist Member Sales Rating: (35) Member#: 86291 Join Date: May 2005 Chapter/Region: NESIC Location: New Fairfield, CT Vehicle: '97 LegaSTi-2.5XTR '96 BrightonCoupeWRX-SR30	Just waitin on paypal email. pm me! thanks!

10-08-2008, 03:36 PM	#10
Kawikid20o2 Scooby Specialist Member Sales Rating: (35) Member#: 86291 Join Date: May 2005 Chapter/Region: NESIC Location: New Fairfield, CT Vehicle: '97 LegaSTi-2.5XTR '96 BrightonCoupeWRX-SR30	payment sent K&N Typhoon sold to me!

10-08-2008, 09:50 PM	#11
fiberedimage Scooby Newbie Member Sales Rating: (11) Member#: 115765 Join Date: May 2006 Chapter/Region: MWSOC Location: Louisville KY Vehicle: 2008 WRX STi Black	So the Intake and the gauge cluster bezel are gone. The other stuff is still available. Just in case someone says anything, I had recieved 2 payments for the intake. My Paypal address is displayed up top, I considered the first person to have the payment (since it does show it in order recieved in pay pal) to me the new owner. Sorry for any confusion but I did refund the payment to the later sender. Up to the top!

10-08-2008, 10:27 PM	#12
haberkorn Scooby Specialist Member Sales Rating: (26) Member#: 97732 Join Date: Oct 2005 Chapter/Region: RMIC Location: Colorado Vehicle: 2004 STi 65 Nova 8.80@151	How much for the Maf tube alone i don't need the inlet...pm me a price shipped Thanks

10-14-2008, 01:07 PM	#15
Kawikid20o2 Scooby Specialist Member Sales Rating: (35) Member#: 86291 Join Date: May 2005 Chapter/Region: NESIC Location: New Fairfield, CT Vehicle: '97 LegaSTi-2.5XTR '96 BrightonCoupeWRX-SR30	Got the Typhoon today thanks!