Air/Water intercooler install, any suggestions?

[BlueDemon]

Hey all.... I don't know why I haven't put this up for discussion before. I acquired a Air/Water intercooler from a turbo legacy a few months ago and I've been meaning to do the install. I have the water pump, and all I need is some sort of 5+ gallon water container and the pipes to set everything up. I was wondering:

1: If anyone has anything positive or negative to say about this install, please feel free to share it. I'd like to get feedback

and

2: If anyone has any suggestions to make this install as easy, painless and cheap as possible.

My main concern is where my GFB blow off valve would go? They say there's a pipe that would connect it all the way it is connected now..... but I fail to see this.... because of my limited mechanical knowledge.

Thanks for all your help. Oh, and if anyone knows any shops that would do this type of work.

Blue

* Registered users of the site do not see these ads.

it wouldn't hurt to check out a turbo legacy with the air to water setup already on it... Or you could post something in the legacy forums to see if any1 with the intercooler knows anything ..

Also do a search for the air to water setup because i know i have done it in the past and ended up with some info


good thing i archive alot of the stuff i find eh

so this should help..

http://www.autospeed.com/A_0090/P_2/article.html

http://www.netcomuk.co.uk/~gavinp/airwater.htm

http://forums.nasioc.com/forums/show...ht=intercooler

http://forums.nasioc.com/forums/show...hreadid=181706

http://www.vividracing.com/cgi-bin/c...15&thread=1183

Please let me know how this turns out so It will be easier for me if i go that route

[BlueDemon]

Oh, of course! Thanks so much for those links! They were great!

Blue