UTEC Interface Thread - Page 43

80884 · 01-21-2011, 06:00 PM

It says "could not find the main class:Utij.Utij.app.Program will exit" when I try to open Uti.jar. What does that mean?

* Registered users of the site do not see these ads.

NavyBlueSubaru · 01-21-2011, 06:02 PM

Are you sure you downloaded the full zip file? There should be a folder with libraries in it, and some other folders too. Also, if you just open the zip and try to run it won't work, you have to unzip it into its own folder on your hard drive.

80884 · 01-21-2011, 06:57 PM

The problem is my laptop wont update Java to 6.0. Tried in on a computer and it worked but. thats no good for me if it wont work on my laptop. I guess its time for a new one.

langsbr · 04-27-2011, 11:09 PM

Does this facilitate tuning using UTEC in speed density mode, or just MAF based? I see the screenshots show some MAF tabs.

azkaz · 05-18-2011, 03:48 AM

Jeff has stated that it does support speed density. You just have to change the "fuel mode" in the settings tab.

On another note, I have tried and tried to start the UTI program but can't. I have double clicked on the jar file and it just goes to winzip to unzip where it extracts the other files,. I have searched google for he answer, but till no joy. I have the latest java software too.

Cheers

filbert · 05-19-2011, 11:44 AM

It shouldn't be opening in WinZip. Something is off in your Java config. Try opening the file with your JRE/JVM and see if that works. You might have to change the default application for the .jar extension. What Java software did you install?

azkaz · 05-19-2011, 05:27 PM

All sorted. Winzip was hijacking my file extension. Downloaded jarfix and all is well!

Cheers.

80884 · 09-29-2011, 10:23 PM

I can't get the new version to work. I installer the way the note says to but this comes up when double clicking the uti in the same folder..."A Java execption has occured"

NavyBlueSubaru · 09-29-2011, 10:25 PM

The newest version of UTI requries JRE 7, found here:
http://www.oracle.com/technetwork/ja...ad-432155.html

ensure that you have this, I bet this is the problem.

80884 · 09-30-2011, 02:47 AM

The problem is that sometimes I forget to do the simplest things. I pretty much did not extract the zip file and was trying to open it directly from the zipped folder.

That's what happens when I play with computers later in the night. Anything interesting to know about the newest program? Anything that doesn't work?

2.5 turbo hyped · 02-14-2012, 07:45 AM

I finally got all of the pieces to the puzzle installed this weekend. I have a 2005 baja turbo 5 speed and I am using an STI UTEC and an innovate lc-1 wideband.

The UTI program works great. I have some awesome 3rd gear pulls saved and some excellent cell hits on the tables. I do have a couple of questions that may seem stupid to some of you guys that have been using this setup for a bit.

1. When using speed density fuel tuning in UTI do I have to setup the UTEC in hyperterminal first to be able to use this function or does UTI do that for me?

2. I am trying to write a map with the logs and tables I have in UTI ME. One problem I am having is when I use the "Import tables" function I get tables with all zeros. I am pulling the tables file from the UTI folder (tables.csv)

3. Right now I am logging using map 0 on the UTEC (stock), should I be using a blank map on 1? Just not sure if it's okay to use the stock map for logging or not. I want to be able to write a nice map for it.

Any help you can provide to a new user would be greatly appreciated.

Thanks in advance.

2.5 turbo hyped · 02-17-2012, 09:05 AM

Quote:

Originally Posted by 2.5 turbo hyped

I finally got all of the pieces to the puzzle installed this weekend. I have a 2005 baja turbo 5 speed and I am using an STI UTEC and an innovate lc-1 wideband.

The UTI program works great. I have some awesome 3rd gear pulls saved and some excellent cell hits on the tables. I do have a couple of questions that may seem stupid to some of you guys that have been using this setup for a bit.

1. When using speed density fuel tuning in UTI do I have to setup the UTEC in hyperterminal first to be able to use this function or does UTI do that for me?

2. I am trying to write a map with the logs and tables I have in UTI ME. One problem I am having is when I use the "Import tables" function I get tables with all zeros. I am pulling the tables file from the UTI folder (tables.csv)

3. Right now I am logging using map 0 on the UTEC (stock), should I be using a blank map on 1? Just not sure if it's okay to use the stock map for logging or not. I want to be able to write a nice map for it.

Any help you can provide to a new user would be greatly appreciated.

Thanks in advance.

I took the utec out since there is very little support for it anymore. it's in the dumpster if anyone wants it. Going with open source.

NavyBlueSubaru · 02-18-2012, 04:09 PM

If you seriously took it out

then I won't bother answering, but if you were just joking then I will answer.

-Jeff

2.5 turbo hyped · 02-18-2012, 04:51 PM

Quote:

Originally Posted by NavyBlueSubaru

If you seriously took it out

then I won't bother answering, but if you were just joking then I will answer.

-Jeff

hell yeah I took it out I got tired of waiting weeks on end for an answer. garbage man picked it up yesterday and I never felt happier. biggest waste of money I ever had. but at least you got my 25 bucks for the software.

ride5000 · 02-19-2012, 08:09 AM

Quote:

Originally Posted by 2.5 turbo hyped

hell yeah I took it out I got tired of waiting weeks on end for an answer. garbage man picked it up yesterday and I never felt happier. biggest waste of money I ever had. but at least you got my 25 bucks for the software.

you're not too smart.

2.5 turbo hyped · 02-19-2012, 08:50 AM

Quote:

Originally Posted by ride5000

you're not too smart.

I agree, buying the utec was the dumbest idea ever.

I get an answer to my questions on the romraider forums within minutes and I do not have to purchase any software. I find it easier to understand and tune with anyhow.

SBW · 02-19-2012, 10:03 AM

How exactly did you wait weeks? You posted a question about the software in the thread about the software and the author responded in a few days.

Where I work we pay upwards of 90k for software and don't even necessarily get a support contract. You pay $25 and want immediate answers. Btw most of the answers to your questions are in the utec manual, RTFM.

2.5 turbo hyped · 02-19-2012, 11:07 AM

Quote:

Originally Posted by SBW

How exactly did you wait weeks? You posted a question about the software in the thread about the software and the author responded in a few days.

Where I work we pay upwards of 90k for software and don't even necessarily get a support contract. You pay $25 and want immediate answers. Btw most of the answers to your questions are in the utec manual, RTFM.

I used email first after not getting response I posted the question here. This app is being used on baja and the strange thing is that even with the software the dashboard wasn't showing up. I even went ahead and called turbo xs and they wanted nothing to do with me. I got a lot of I don't know and what's the deal answers from them. I understand open source a lot better than I do the utec. I was being sarcastic when I said I threw it away actually have the utec here it is in great condition it works just fine. 130 bucks shipped takes it. http://portland.craigslist.org/mlt/pts/2855487693.html

350zzz · 09-06-2020, 01:58 AM

@Jeff where can I get UTI and UTI-Me nowadays? jeffsoftware.com is gone

02-14-2012, 07:45 AM	#1061
2.5 turbo hyped Scooby Specialist Member#: 158810 Join Date: Sep 2007 Chapter/Region: NWIC Location: Portland Or Vehicle: 2005 STI and Baja White	Did not get a reply to email so I thought I would post here. I finally got all of the pieces to the puzzle installed this weekend. I have a 2005 baja turbo 5 speed and I am using an STI UTEC and an innovate lc-1 wideband. The UTI program works great. I have some awesome 3rd gear pulls saved and some excellent cell hits on the tables. I do have a couple of questions that may seem stupid to some of you guys that have been using this setup for a bit. 1. When using speed density fuel tuning in UTI do I have to setup the UTEC in hyperterminal first to be able to use this function or does UTI do that for me? 2. I am trying to write a map with the logs and tables I have in UTI ME. One problem I am having is when I use the "Import tables" function I get tables with all zeros. I am pulling the tables file from the UTI folder (tables.csv) 3. Right now I am logging using map 0 on the UTEC (stock), should I be using a blank map on 1? Just not sure if it's okay to use the stock map for logging or not. I want to be able to write a nice map for it. Any help you can provide to a new user would be greatly appreciated. Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Enhanced UTEC Interface ...?	ScreaminFast	Engine Management & Tuning	4	09-20-2003 11:23 PM
UTEC interface enhancement (Long)	LiquidForce	Engine Management & Tuning	51	06-09-2003 04:10 PM
UTEC Interface Enhancement	LiquidForce	Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo)	6	05-29-2003 11:42 AM
UTEC software or interface	nekard	Engine Management & Tuning	5	10-22-2002 04:16 PM
UTEC interface program question?	davidm_sh	Engine Management & Tuning	3	10-09-2002 11:07 AM

01-21-2011, 06:00 PM	#1051
80884 Scooby Specialist Member#: 56783 Join Date: Mar 2004 Chapter/Region: MAIC Location: PA Vehicle: 2004 sti Aspen white	It says "could not find the main class:Utij.Utij.app.Program will exit" when I try to open Uti.jar. What does that mean? * Registered users of the site do not see these ads.

01-21-2011, 06:02 PM	#1052
NavyBlueSubaru Scooby Specialist Member#: 22127 Join Date: Jul 2002 Chapter/Region: South East Location: Oviedo, FL Vehicle: 2013 BMW 335i Sedan Estoril Blue	Are you sure you downloaded the full zip file? There should be a folder with libraries in it, and some other folders too. Also, if you just open the zip and try to run it won't work, you have to unzip it into its own folder on your hard drive.

01-21-2011, 06:57 PM	#1053
80884 Scooby Specialist Member#: 56783 Join Date: Mar 2004 Chapter/Region: MAIC Location: PA Vehicle: 2004 sti Aspen white	The problem is my laptop wont update Java to 6.0. Tried in on a computer and it worked but. thats no good for me if it wont work on my laptop. I guess its time for a new one.

04-27-2011, 11:09 PM	#1054
langsbr Scooby Newbie Member#: 209630 Join Date: Apr 2009 Location: Lexington, SC Vehicle: 2002 WRX / V7 STI 3.9USM6 / PSM	Does this facilitate tuning using UTEC in speed density mode, or just MAF based? I see the screenshots show some MAF tabs.

05-18-2011, 03:48 AM	#1055
azkaz Scooby Newbie Member#: 283097 Join Date: May 2011	Jeff has stated that it does support speed density. You just have to change the "fuel mode" in the settings tab. On another note, I have tried and tried to start the UTI program but can't. I have double clicked on the jar file and it just goes to winzip to unzip where it extracts the other files,. I have searched google for he answer, but till no joy. I have the latest java software too. Cheers

05-19-2011, 11:44 AM	#1056
filbert Scooby Specialist Member#: 39661 Join Date: Jul 2003 Chapter/Region: MWSOC Location: Chicago Vehicle: 2017 BRZ WRB	It shouldn't be opening in WinZip. Something is off in your Java config. Try opening the file with your JRE/JVM and see if that works. You might have to change the default application for the .jar extension. What Java software did you install?

05-19-2011, 05:27 PM	#1057
azkaz Scooby Newbie Member#: 283097 Join Date: May 2011	All sorted. Winzip was hijacking my file extension. Downloaded jarfix and all is well! Cheers.

09-29-2011, 10:23 PM	#1058
80884 Scooby Specialist Member#: 56783 Join Date: Mar 2004 Chapter/Region: MAIC Location: PA Vehicle: 2004 sti Aspen white	I can't get the new version to work. I installer the way the note says to but this comes up when double clicking the uti in the same folder..."A Java execption has occured"

09-29-2011, 10:25 PM	#1059
NavyBlueSubaru Scooby Specialist Member#: 22127 Join Date: Jul 2002 Chapter/Region: South East Location: Oviedo, FL Vehicle: 2013 BMW 335i Sedan Estoril Blue	The newest version of UTI requries JRE 7, found here: http://www.oracle.com/technetwork/ja...ad-432155.html ensure that you have this, I bet this is the problem.

09-30-2011, 02:47 AM	#1060
80884 Scooby Specialist Member#: 56783 Join Date: Mar 2004 Chapter/Region: MAIC Location: PA Vehicle: 2004 sti Aspen white	The problem is that sometimes I forget to do the simplest things. I pretty much did not extract the zip file and was trying to open it directly from the zipped folder. That's what happens when I play with computers later in the night. Anything interesting to know about the newest program? Anything that doesn't work?

02-18-2012, 04:09 PM	#1063
NavyBlueSubaru Scooby Specialist Member#: 22127 Join Date: Jul 2002 Chapter/Region: South East Location: Oviedo, FL Vehicle: 2013 BMW 335i Sedan Estoril Blue	If you seriously took it out then I won't bother answering, but if you were just joking then I will answer. -Jeff

02-19-2012, 10:03 AM	#1067
SBW Scooby Specialist Member#: 38469 Join Date: Jun 2003 Chapter/Region: NESIC Vehicle: 07 LGT spec-b Crystal Grey Metallic	How exactly did you wait weeks? You posted a question about the software in the thread about the software and the author responded in a few days. Where I work we pay upwards of 90k for software and don't even necessarily get a support contract. You pay $25 and want immediate answers. Btw most of the answers to your questions are in the utec manual, RTFM.

09-06-2020, 01:58 AM	#1069
350zzz Scooby Newbie Member#: 518373 Join Date: Sep 2020	@Jeff where can I get UTI and UTI-Me nowadays? jeffsoftware.com is gone